Datasheet4U Logo Datasheet4U.com

AMMP-6522 - 7 to 20 GHz GaAs MMIC LNA/IRM Receiver

General Description

Avago’s AMMP-6522 is an easy-to-use broadband integrated receiver in a surface mount package.

The MMIC includes a 3-stage LNA to provide gain amplification and a gate-pumped image-reject mixer for frequency translation.

Key Features

  • 5x5 mm Surface Mount Package.
  • Integrated Low Noise Amplifier.
  • Integrated Image Reject Mixer.
  • 50 Ω Input and Output Match.
  • Single Supply Bias Pin Specifications Vd = 4.0 V (75 mA), Vg = -1.0 V (0.1 mA).
  • RF frequency: 7 to 20 GHz.
  • IF frequency: DC to 3.5 GHz.
  • Conversion Gain (RF/IF): 13 dB.
  • Input Intercept Point: -4 dBm.
  • Image Suppression: 15 dB.
  • Total Noise Figure: 2.4 dB.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
AMMP-6530 5-30 GHz Image Reject Mixer Agilent Technologies
AMMP-6130 30 GHz Power Amplifier with Frequency Multiplier AVAGO TECHNOLOGIES
AMMP-6220 6-20 GHz Low Noise Amplifer AVAGO TECHNOLOGIES
AMMP-6220 6-20 GHz Low Noise Amplifer Agilent Technologies
AMMP-6222 7 to 21 GHz GaAs High Linearity LNA AVAGO TECHNOLOGIES

Other Datasheets by Avago Technologies (now Broadcom)

Part Number Description
AMMP-6530 Image Reject Mixer
AMMP-6532 20-32 GHz GaAs MMIC LNA/IRM Receiver
AMMP-6545 18 to 40 GHz GaAs MMIC Sub-Harmonic Mixer
AMMP-6546 18 to 40 GHz GaAs MMIC Sub-Harmonic Mixer
AMMP-6120 8-24 GHz x2 Frequency Multiplier

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
AMMP-6522 7 to 20 GHz GaAs MMIC LNA/IRM Receiver in SMT Package Data Sheet Description Avago’s AMMP-6522 is an easy-to-use broadband integrated receiver in a surface mount package. The MMIC includes a 3-stage LNA to provide gain amplification and a gate-pumped image-reject mixer for frequency translation. The overall receiver performs Single Side Band down-conversion in the 7 to 20 GHz RF signal range. The LO and RF are matched to 50  Ω. The IF output is provided in 2-port format where an external 90-degree hybrid can be utilized for full image rejection. The LNA requires a 4 V, 75 mA power supply, where the mixer bias is a simple -1 V, 0.1 mA. The MMIC is fabricated using PHEMT technology. The surface mount package allows elimination of “chip & wire” assembly for lower cost.