Datasheet4U Logo Datasheet4U.com

MGA-61563 - Low Noise Amplifier

General Description

Avago Technologies' MGA-61563 is an economical, easy-to-use GaAs MMIC amplifier that offers excellent linearity and low noise figure for applications from 0.1 to 6 GHz.

Packaged in an miniature SOT-363 package, it requires half the board space of a SOT-143 package.

Key Features

  • Single +3V or + 5V supply.
  • High linearity.
  • Low noise figure.
  • Miniature SOT363 (SC70) package.
  • Unconditionally stable.
  • Lead-free option available Specifications at 2 GHz; 3V, 41 mA (Typ. ).
  • 28.5 dBm OIP3.
  • 1.2 dB noise figure.
  • 16.6 dB gain.
  • 15.8 dBm P 1dB Package Diagram 6Ax GND 1 GND 2 6 OUTPUT and Vd 5 GND INPUT 3 4 BIAS Note: Package marking provides orientation and identification: “6A” = Device Code “x” = Date code indicates the.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
MGA-61563 Low Noise Amplifier Agilent Technologies
MGA-62563 Current-Adjustable / Low Noise Amplifier Agilent
MGA-64135 2 - 6 GHz Cascadable GaAs MMIC Amplifier Agilent(Hewlett-Packard)
MGA-665P8 GaAs Enhancement-Mode PHEMT 0.5 - 6 GHz Low Noise Amplifier Agilent
MGA-13116 Very Low Noise Amplifier Avago Technologies

Other Datasheets by Avago Technologies (now Broadcom)

Part Number Description
MGA-62563 Low Noise Amplifier
MGA-631P8 Active Bias Low Noise Amplifier
MGA-632P8 High Linearity Active Bias Low Noise Amplifier
MGA-633P8 High Linearity Low Noise Amplifier
MGA-634P8 High Linearity Low Noise Amplifier

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
MGA-61563 Current-Adjustable, Low Noise Amplifier Data Sheet Description Avago Technologies' MGA-61563 is an economical, easy-to-use GaAs MMIC amplifier that offers excellent linearity and low noise figure for applications from 0.1 to 6 GHz. Packaged in an miniature SOT-363 package, it requires half the board space of a SOT-143 package. One external resistor is used to set the bias current taken by the device over a wide range. This allows the designer to use the same part in several circuit positions and tailor the linearity performance (and current consumption) to suit each position. The MGA-61563 is normally operating with Id set in the 20-60mA range The output of the amplifier is matched to 50Ω (below 2:1 VSWR) across the entire bandwidth and only requires minimum input matching.