MGA-86563 Datasheet | Avago Technologies

Description Avago’s MGA-86563 is an economical, easy-to-use Ga As MMIC amplifier that offers low noise figure and excellent gain for applications from 0.5 to 6 GHz. Packaged in an ultra-miniature SOT-363 package, it requires half the board space of the SOT-143. The MGA-86563 may be used without impedance matching as a high performance 2 d B NF gain block. Alternatively, with the addition of a simple shunt-series inductor at the input, the device noise figure can be reduced to 1.6  d B at 2.4 GHz. For 1.5 GHz applications and above, the output is well matched to 50 Ω. Below 1.5 GHz, gain can be increased by using conjugate matching. The circuit uses state-of-the-art PHEMT technology with self-biasing current sources, a source-follower interstage, resistive feedback, and on-chip impedance matching networks. A patented, on-chip active bias circuit allows operation from a single +5 V power supply. Current consumption is only 14 m A, making this part suitable for battery powered applications. Surface Mount Package SOT-363 (SC-70) Features x Lead-free Option Available x Ultra-Miniature Package x Internally Biased, Single +5V Supply (14 m A) x 1.6 d B Noise Figure at 2.4 GHz x 21.8 d B Gain at 2.4 GHz x +3.1 d Bm P at 2.4 GHz 1 d B Applications x LNA or Gain Stage for ISM, PCS, MMDS, GPS, TVRO, and Other C band Applications Equivalent Circuit RF NPUT RF OUTPUT AND Vd Pin Connections and Package Marking 86x INPUT 1 6 GND GND 2 5 GND GND 3 OUTPUT and Vd Note: Package marking provides orientation and identification. "86" = Device Code "x" = Date code character identifies month of manufacture GROUND 2, 3, 5, 6 Attention: Observe precautions for handling electrostatic sensitive devices. ESD Human Body Model (Class 0) Refer to Avago Application Note A004R: Electrostatic Discharge Damage and Control. MGA-86563 Absolute Maximum Ratings Symbol V d V in P in T ch T STG Parameter Device Voltage, RF Output to Ground RF Input Voltage to Ground CW RF Input Power...