MS20001
MS20001 is STRUCTURAL EXTRUDED HINGE manufactured by AVIAQUIP.
STRUCTURAL EXTRUDED HINGE
STANDARD LENGTH 72 INCHES OTHER LENGTHS AVAILABLE ON REQUEST.
Dash Number -2 -3 -4 -5 -6 -8
A Ref Width Open 1.062 1.250 1.500 1.750 2.000 2.000
B (Thickness) Max. Min.
D Loop
Hole Dia. +.005
P Pitch
Pin Diameter
.056
.044
.495
.093
1.00”
.090
.076
.064
.183
MATERIAL : ALUMINIUM ALLOY 2024T-3511 FINISH : ANODIZED OR BARE PART NUMBERS : EXAMPLE
- MS20001-4-7200 PLETE HINGE
- BARE 72" LONG MS20001P4-7200 PLETE HINGE ANODIZED FINISH 72" LONG
CONTINUOUS HINGE
- FOLDED
MS20257
THE MARKING MS20257-(SIZE DASH NUMBER)SHALL BE IMPRESSED IN THE HINGE AT REGULAR INTERVALS ALONG THE LENGTH OF THE HINGE SO THAT ANY THREE INCH LENGTH WILL SHOW AT LEAST ONE PLETE IDENTIFICATION IN FIGURES NOT LESS THAN .06 INCHESHIGH. DEPRESSED FIGURES SHALL NOT EXCEED .010 INCH IN DEPTH. DESIGNATION FORANODIZING AND LENGTH SHALL NOT BE INCLUDED IN THE MARKING.
Dash Number For plete Hinge Aluminium 1/ -1 -2 -3 -4 -5 -6 2/ P1 P2 P3 P4 P5 P6 C1 C2 C3 C4 C5 C6 CRES
A Width Open +.016 .750 1.062 1.250 1.500 2.000
B Thickness Alum. Alloy .032 .040 .051 .064 CRES .031 .037 .050 .062
D Loop +.001 -.008
Hole Diameter +.007 -.001 Alum. Alloy .066 P Pitch CRES .066 .093...
