Datasheet4U Logo Datasheet4U.com

AW9364 - 4-Channel 1-wire Dimming LED Driver

Description

Enable Pin.

Active high, with an internal 150kΩ pull-down resistor.

Features

  • Ultra low dropout: 50mV/20mA(typical).
  • Support up to 4 LEDs.
  • LED sink current up to 20mA.
  • ±1% LED current matching(typical).
  • En Pin Deglitch circuit.
  • Thermal shutdown protection.
  • 16-step brightness control.
  • ESD protection: ±8kV(HBM).
  • No EMI and switch noise.
  • Packages: DFN2x2-8L.

📥 Download Datasheet

Datasheet Details

Part number AW9364
Manufacturer AWINIC
File Size 1.11 MB
Description 4-Channel 1-wire Dimming LED Driver
Datasheet download datasheet AW9364 Datasheet

📁 Similar Datasheet

Other Datasheets by AWINIC
  • AW9358 - 8-channel dimmable low dropout constant current common anode parallel white LED driver
  • AW9106 - 6-way breathing light controller
  • AW9106B - 6-LED Driver and GPIO Controller
  • AW9109 - 9 Programmable LED Driver
  • AW9110B - 10-LED Driver and GPIO Controller
  • AW9119 - 1-Key Capacitive Touch Controller
  • AW9120 - 20-Programmable LED Driver
  • AW9201 - Single Key Capacitive Controller

Full PDF Text Transcription

Click to expand full text
AW9364 Feb 2018 V2.3 4-Channel 1-wire Dimming LED Driver with Ultra Low Dropout Current Source FEATURES  Ultra low dropout: 50mV/20mA(typical)  Support up to 4 LEDs  LED sink current up to 20mA  ±1% LED current matching(typical)  En Pin Deglitch circuit  Thermal shutdown protection  16-step brightness control  ESD protection: ±8kV(HBM)  No EMI and switch noise  Packages: DFN2x2-8L APPLICATIONS  Mobile phone  Digital camera  PDA MP3 l tia DESCRITION The AW9364 is a 4-channel ultra low dropout constantsource parallel LED driver. With the proprietary Q-MirrorTM technique, the AW9364 uses an internal resistor to set the bias current for four LEDs, which are matched to n ±1%. The AW9364 incorporates a single wire interface to program the output current at 16 continuous steps.
Published: |