Datasheet4U Logo Datasheet4U.com

AX3001 - 2A PWM Buck DC/DC Converter

General Description

The AX3001 series are monolithic IC designed for a step-down DC/DC converter, and own the ability of driving a 2A load without additional transistor.

It saves board space.

The external shutdown function can be controlled by logic level and then come into standby mode.

Key Features

  • - w`R m Û V w output voltage range, 1.23V to 19.5V. Adjustable version 150KHz fixed switching frequency. Voltage mode non-synchronous PWM control. Thermal-shutdown and current-limit protection. ON/OFF shutdown control input. Short Circuit Protect (SCP). Operating voltage can be up to 22V. Output load current: 2A. SOP-8L Pb-Free packages. Low power standby mode. Built-in switching transistor on chip. Output voltage: 3.3V, w 5V, 12V and adjustable output version. w fo o g . te co . h c m.

📥 Download Datasheet

Datasheet Details

Part number AX3001
Manufacturer AXElite
File Size 529.35 KB
Description 2A PWM Buck DC/DC Converter
Datasheet download datasheet AX3001 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
AX3001 Synchronous Boost DC/DC Regulator Anxson
AX3 Ultra-Low Jitter & Power Optimized 3.2 x 2.5mm XO ABRACON
AX31002 Bipolar Tone Ringer IC Avantics
AX3112 PWM Control 3A Step-Down Converter AXE
AX3112A PWM Control 3A Step-Down Converter AXE

Other Datasheets by AXElite

Part Number Description
AX3002 3A PWM Buck DC/DC Converter
AX3003 3A PWM Buck DC/DC Converter
AX3005 3A PWM Buck DC/DC Converter
AX3006 3A PWM Buck DC/DC Converter
AX3007 2A PWM Buck DC/DC Converter

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
AX3001 150KHz, 2A PWM Buck DC/DC Converter  GENERAL DESCRIPTION The AX3001 series are monolithic IC designed for a step-down DC/DC converter, and own the ability of driving a 2A load without additional transistor. It saves board space. The external shutdown function can be controlled by logic level and then come into standby mode. The internal compensation makes feedback control having good line and load regulation without external design. Regarding protected function, thermal shutdown is to prevent over temperature operating from damage, and current limit is against over current operating of the output switch. If current limit function occurs and VFB is down below 0.5V, the switching frequency will be reduced.