Datasheet4U Logo Datasheet4U.com

AX8112 - Ultra-sensitive Hall Effect Switch

Description

AX8112 is a Hall Effect sensor device with Dual output driver, mainly designed for battery

operation, hand-held equipment (such as Cellular and Cordless Phone, PDA).

For AX8112, the total operation power is down to 10uW in the 1.8V supply.

Features

  • Micro Power Operation for Battery.

📥 Download Datasheet

Datasheet preview – AX8112

Datasheet Details

Part number AX8112
Manufacturer AXElite
File Size 370.06 KB
Description Ultra-sensitive Hall Effect Switch
Datasheet download datasheet AX8112 Datasheet
Additional preview pages of the AX8112 datasheet.

📁 Similar Datasheet

  • AX8052F100 - Ultra-Low Power Microcontroller (ON Semiconductor)
  • AX8052F131 - SoC Ultra-Low Power RF-Microcontroller (AXSEM)
  • AX8052F131 - SoC Ultra-Low Power RF-Microcontroller (ON Semiconductor)
  • AX8052F143 - SoC Ultra-Low Power RF-Microcontroller (ON Semiconductor)
  • AX8052F143 - SoC Ultra-Low Power RF-Microcontroller (AXSEM)
  • AX8052F151 - SoC Ultra-Low Power RF-Microcontroller (On Semiconductor)
  • AX820K - Ceramic Composite Resistors (OHMITE)
  • AX821K - Ceramic Composite Resistors (OHMITE)
  • AX82GK - Ceramic Composite Resistors (OHMITE)
  • AX88140A - 100BASE-TX/FX PCI Bus Fast Ethernet MAC Controller (ETC)
Other Datasheets by AXElite
  • AX8111 - Ultra-sensitive Hall Effect Switch
  • AX8113 - Ultra-sensitive Hall Effect Switch
  • AX8101 - Ultra-sensitive Hall Effect Switch
  • AX8101A - Ultra-sensitive Hall Effect Switch
  • AX8104 - Ultra-sensitive Hall Effect Switch
  • AX8401 - COMPLEMENTARY OUTPUT HALL EFFECT LATCH
  • AX8701 - Power Multiplexer
  • AX8710 - 0.5A High Side Power Switch With Flag

Full PDF Text Transcription

Click to expand full text
AX8112 MicroPower, Ultra-sensitive Hall Effect Switch  GENERAL DESCRIPTION AX8112 is a Hall Effect sensor device with Dual output driver, mainly designed for battery–operation, hand-held equipment (such as Cellular and Cordless Phone, PDA). For AX8112, the total operation power is down to 10uW in the 1.8V supply. Either north or South Pole of sufficient strength will turn the output on. The output will be turned off under no magnetic field. When the magnetic flux density (B) is larger than operate point (Bop) the output is switched on. The output is turned off when B becomes lower than the release point (Brp). The output will remain off when there is no magnetic field. The AX8112 has two outputs, output one pulls low when switched on and output two is inverted.
Published: |