AX8401 Datasheet PDF

AXElite AX8401

AX8401 is a single-digital-output Hall-Effect latch sensor for high temperature operation. The device includes an on-chip Hall voltage generator for magnetic sensing, an amplifier to amplify Hall voltage, a comparator to provide switching hysteresis for noise rejection, and an output driver. When the magnetic flux density (B) is larger than operate point (Bop), output is switched on (OUT pin is pulled low).

Part No.	AX8401
Datasheet	AX8401 Download
Manufacturer	AXElite
Description	COMPLEMENTARY OUTPUT HALL EFFECT LATCH
Buy	Stock & Price

GENERAL DESCRIPTION

An internal bandgap regulator provides a temperature compensated supply voltage for internal circuits and allows a wide operating supply range. The output state is held on until a magnetic flux density reversal falls below Brp. When B is less than Brp, the output is switched off. The AX8401 is available in SIP-3L package. 

FEATURES

Bipolar Hall-Effect latch sensor 4.5V to 28V DC operating voltage 20mA output sink current Board Operating temperature range of -40°C to +125°C Green package: SIP-3L  BLOCK DIAGRAM VCC 1 VÛmw`R●yÑb€ w.goftechm REG 3 + AMP OUT 2 GND 1/6 Axelite Confidential Materials, do not copy or distribute without written consent. Rev.1.0 Jul. 25, 2011 AX8401  PIN ASSIGNMENT The package of AX8401 is SIP-3L; the pin assignment is given by: (Top View) AX8401 Name VCC GND OUT

DESCRIPTION

Positive Power Supply Ground Output Stage 1 VCC 2 GND 3 OUT  ORDER/MARKING INFORMATION Order Information Top Marking Logo AX8401 XX X Package Type I3: SIP-3L Packing...