AZ Displays AGM1212N
The polarity of the pin 37 and the pin 39: symbol J6,J4 symbol state Each solder-bridge J3,J5 J6, Each closed J4 Each open LED Polarity 37 Pin 39 Pin A node Cathode J3,J5 Each solder-bridge Each open Each closed Cathode A node Note: In application module, J3=J5 =J2=closed,J4=J6= open. The J1 is metal-bezel GND to module GND and J7 is mountingholes GND to module GND.
DESCRIPTION
: 7-1-1. 7-1-2. Note: I n application module, J1= J7=closed 7-1-3.T he L E D resistor should be bridged when J2 is cl osed Note: I n application module, J2=closed 7-1-4.T he R8 and the R9, R 10, R 11 are the LED resist or. Note: In application module, R8 = R 9= R 10= R 11=open 7.2 Example application 7-2-1. The LE D resistor should be bridged as following. R1 1 R 10 R9 R8 J2 7-2-2. The 37 pin is the anode and the 39 pin is the cathodeas following. J6 J4 J3 J5 7-2-3.T he 37 pin is the cathodeand the 39 pin is the anodeas following. J4 J6 J5 J3 7-2-4. The metal-bezel is on groundas following. J1 J7 AZ Displays, Inc. Page 06 8. ABSOLUTE M A XIMUM RA TINGS( Vss=0V , T a=25 ) PARAMETER Supply Voltage (Logic) Input voltage Operating Temperature StorageTemperature SYMBOL V DD V IN Topr Tstg RA TING -0.3 to 7.0 -0.3 to VDD +0.3 -20 to +70 -25 to +75 UNIT V V 9. ELECTRICAL CHARACTERISTICS
1). DC Characteristics Parameter Symbol Supply Voltage (Logic) High Level In putVoltage Low Leve...
AZ Displays
