ATM0430D52-T Datasheet | AZ Displays

AZ DISPLAYS SPECIFICATIONS FOR LIQUID CRYSTAL DISPLAY CUSTOMER APPROVAL ※ PART NO. : ATM0430D52-T (AZ DISPLAYS) SPEC V1.0 APPROVAL PANY CHOP CUSTOMER MENTS AZ DISPLAYS ENGINEERING APPROVAL DESIGNED BY CHECKED BY APPROVED BY ATM0430D52-T(AZ DISPLAYS)TFT MODULE SPEC V1.0 REVISION RECORD REVISION REVISION DATE PAGE CONTENTS PRELIMINARY V1.0 2020-05-15 2020-06-18 2020-08-03 FIRST ISSUE CORRECT PIN4~8 PIN DEFINITION FORMAL SPECIFICATION AZ DISPLAYS ATM0430D52-T(AZ DISPLAYS)TFT MODULE SPEC V1.0 ※ CONTENTS 1. GENERAL SPECIFICATIONS 2. PIN ASSIGNMENT 3. OPERATING SPECIFICATIONS 4. OPTICAL SPECIFICATIONS 5. RELIABILITY TEST 6. PRECAUTION FOR USING LCM 7. MECHANICAL DRAWING 8. PACKAGE DRAWING 9. INSPECTION SPECIFICATION AZ DISPLAYS ATM0430D52-T(AZ DISPLAYS)TFT MODULE SPEC V1.0 1. GENERAL SPECIFICATIONS Item 1. LCD size 2. Driver element 3. Resolution 4. Display mode 5. Dot Pitch (W- H) 6. Pixel pitch(W- H) 7. Active Area(W- H) 8. Module size (W- H) 9. Surface treatment 10. Bezel material 11. Color arrangement 12. Color 13. Interface 14. Weight 15. Ro HS Specification 4.3 inch(Diagonal) a-Si TFT active matrix 480x(RGB)x272 Normally white , Transmissive 0.0660mm(W) x 0.1980mm(H) 0.1980mm(W) x 0.1980mm(H) 95.04mm(W) x 53.856mm(H) 105.5mm(W) x 67.2mm(H) x4.05mm(D) Anti-glare Stainless steel RGB-stripe 262K 18bit RGB interface 58g(Typ.) Ro HS pliant Remark Note 1 Note 1: Please refer to mechanical drawing. AZ DISPLAYS ATM0430D52-T(AZ DISPLAYS)TFT MODULE SPEC V1.0 2. PIN ASSIGNMENT TFT LCD Panel Driving Section FPC Connector is used for the module electronics interface. The remended model is [HIROSE] FH26G-67S-0.3SHBW(05) or [KYOCERA ELCO] 00 6281 067 2X2 829...