ATM0500D19G-T Datasheet | AZ Displays

AZ DISPLAYS SPECIFICATIONS FOR LIQUID CRYSTAL DISPLAY CUSTOMER APPROVAL ※ PART NO. : ATM0500D19G-T(AZ DISPLAYS) VER1.0 APPROVAL PANY CHOP CUSTOMER MENTS AZ DISPLAYS ENGINEERING APPROVAL DESIGNED BY CHECKED BY APPROVED BY Herbert ATM0500D19G-T(AZ DISPLAYS)TFT MODULE V1.0 REVISION RECORD REVISION REVISION DATE PAGE CONTENTS VER1.0 2016-11-18 FIRST ISSUE AZ DISPLAYS ATM0500D19G-T(AZ DISPLAYS)TFT MODULE V1.0 ※ CONTENTS 1. GENERAL SPECIFICATIONS 2. PIN ASSIGNMENT 3. OPERATING SPECIFICATIONS 4. OPTICAL SPECIFICATIONS 5. RELIABILITY TEST 6. PRECAUTION FOR USING LCM 7. MECHANICAL DRAWING 8. PACKAGE DRAWING 9. INSPECTION SPECIFICATION AZ DISPLAYS ATM0500D19G-T(AZ DISPLAYS)TFT MODULE V1.0 1. GENERAL SPECIFICATIONS Item 1. LCD size 2. Driver element 3. Resolution 4. Display mode 5. Dot Pitch (W- H) 6. Pixel pitch(W- H) 7. Active Area(W- H) 8. Module size (W- H) 9. Surface treatment 10. Color arrangement 11. Color 12. Interface 13. Weight 14. Ro HS Specification 5.0 inch(Diagonal) a-Si TFT active matrix 800x(RGB)x480 Normally white , Transmissive 0.045mm(W) x 0.135mm(H) 0.135mm(W) x 0.135mm(H) 108.0mm(W) x 64.8mm(H) 120.7mm(W) x 75.80H) x4.2mm(D) Anti-glare RGB-stripe 16.7M 24bit RGB interface T.B.D. Ro HS pliant Remark Note 1 Note 1: Please refer to mechanical drawing. AZ DISPLAYS ATM0500D19G-T(AZ DISPLAYS)TFT MODULE V1.0 2. PIN ASSIGNMENT TFT LCD Panel Driving Section FPC Connector is used for the module electronics interface. The remended model is “FH19SC-40S-0.5SH" manufactured by Hirose. Pin...