Datasheet4U Logo Datasheet4U.com

ACP2728 - 38V Boost DC/DC WLED Driver

General Description

The ACP2728 is a boost DC/DC converter that drives WLEDS with a 40V voltage rated switch MOSFET, thus it can drive single or parallel WLED strings for small to large size panel back-lighting.

Key Features

  • integrated open protection that disables the ACP2728 to prevent the output voltage from exceeding the absolute maximum voltage ratings during open LED Conditions. ACP2728 38V Boost DC/DC WLED Driver ◤.

📥 Download Datasheet

Datasheet Details

Part number ACP2728
Manufacturer Acpsemi
File Size 314.10 KB
Description 38V Boost DC/DC WLED Driver
Datasheet download datasheet ACP2728 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
ACP100E 1W Ultra-Miniature DC/DC Converters MicroPower Direct
ACP8039 2.0 - 8.0 GHz AMPLIFIER TELEDYNE
ACPDQC12V-HF TVS Diode Leiditech
ACPE FUNDAMENTAL FREQUENCY Abracon Corporation
ACPEL FUNDAMENTAL FREQUENCY Abracon Corporation

Other Datasheets by Acpsemi

Part Number Description
ACP2766 Boost WLED Driver

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
◤GENERAL DESCRIPTION The ACP2728 is a boost DC/DC converter that drives WLEDS with a 40V voltage rated switch MOSFET, thus it can drive single or parallel WLED strings for small to large size panel back-lighting. The default white LED current is set with the external sensor resistor, and the feedback voltage is regulated to 200mV, as shown in the typical application. During the operation, the WLED current can be controlled by a PWM signal applied to The EN pin, through which the duty cycle determines the feedback reference voltage. For Maximum protection, the device features integrated open protection that disables the ACP2728 to prevent the output voltage from exceeding the absolute maximum voltage ratings during open LED Conditions.