AT25DF021
AT25DF021 is 2-Megabit 2.3-volt or 2.7-volt Minimum SPI Serial Flash Memory manufactured by Adesto Technologies.
Features
- Single 2.3V
- 3.6V or 2.7V
- 3.6V Supply
- Serial Peripheral Interface (SPI) patible
- Supports SPI Modes 0 and 3
- 66 MHz Maximum Operating Frequency
- - Clock-to-Output (t V) of 6 ns Maximum Flexible, Optimized Erase Architecture for Code + Data Storage Applications
- Uniform 4-Kbyte Block Erase
- Uniform 32-Kbyte Block Erase
- Uniform 64-Kbyte Block Erase
- Full Chip Erase Individual Sector Protection with Global Protect/Unprotect Feature
- Four Sectors of 64 Kbytes Each Hardware Controlled Locking of Protected Sectors via WP Pin 128-Byte Programmable OTP Security Register Flexible Programming
- Byte/Page Program (1 to 256 Bytes) Fast Program and Erase Times
- 1.0 ms Typical Page Program (256 Bytes) Time
- 50 ms Typical 4-Kbyte Block Erase Time
- 250 ms Typical 32-Kbyte Block Erase Time
- 450 ms Typical 64-Kbyte Block Erase Time Automatic Checking and Reporting of Erase/Program Failures JEDEC Standard Manufacturer and Device ID Read Methodology Low Power Dissipation
- 7 m A Active Read Current (Typical at 20 MHz)
- 15 μA Deep Power-Down Current (Typical) Endurance: 100,000 Program/Erase Cycles Data Retention: 20 Years plies with Full Industrial Temperature Range Industry Standard Green (Pb/Halide-free/Ro HS pliant) Package Options
- 8-lead SOIC (150-mil Wide)
- 8-pad Ultra Thin DFN (5 x 6 x 0.6 mm)
- -
- -
- 2-Megabit 2.3-volt or 2.7-volt Minimum SPI Serial Flash Memory AT25DF021
(Not Remended for New Designs)
- -
- -
- -
- 1....
