Datasheet4U Logo Datasheet4U.com

AAT3113 - High Efficiency 1.5X Fractional Charge Pumps For White LED Applications

Download the AAT3113 datasheet PDF. This datasheet also covers the AAT variant, as both devices belong to the same high efficiency 1.5x fractional charge pumps for white led applications family and are provided as variant models within a single manufacturer datasheet.

General Description

The AAT3113 and AAT3114/14A are low noise, constant frequency charge pump DC/DC converters that use fractional (1.5X) conversion to increase efficiency in white LED applications.

The devices can be used to produce current levels up to 20mA for each output from a 2.7V to 5.5V input.

Key Features

  • AnalogicTech’s Simple Serial Control™ (S2Cwire™) interface is used to enable, disable, and set the LED drive current for 32-level logarithmic scale LED brightness control. AAT3113 and AAT3114/14A devices have a thermal management system for protection in the event of a short-circuit condition on any of the output pins. Built-in.

📥 Download Datasheet

Note: The manufacturer provides a single datasheet file (AAT-3113.pdf) that lists specifications for multiple related part numbers.

Datasheet Details

Part number AAT3113
Manufacturer Advanced Analogic Technologies
File Size 301.40 KB
Description High Efficiency 1.5X Fractional Charge Pumps For White LED Applications
Datasheet download datasheet AAT3113 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
AAT3113 High Efficiency 1.5X Fractional Charge Pumps Skyworks Solutions
AAT3110 MicroPower Regulated Charge Pump Skyworks Solutions
AAT3111 MicroPower Regulated Charge Pump Skyworks Solutions
AAT3112 High Efficiency Charge Pump AAT
AAT3112 500mA High Efficiency Charge Pump Skyworks

Other Datasheets by Advanced Analogic Technologies

Part Number Description
AAT3110 MicroPower Regulated Charge Pump
AAT3111 MicroPower Regulated Charge Pump
AAT3104 Low Cost 1x/2x 4 Channel Charge Pump WLED Driver
AAT3151 High Efficiency 1X/1.5X/2X Charge Pump For White LED Applications
AAT3152 High Efficiency 1X/1.5X/2X Charge Pump For White LED Applications

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
High Efficiency 1.5X Fractional Charge Pumps For White LED Applications General Description The AAT3113 and AAT3114/14A are low noise, constant frequency charge pump DC/DC converters that use fractional (1.5X) conversion to increase efficiency in white LED applications. The devices can be used to produce current levels up to 20mA for each output from a 2.7V to 5.5V input. A low external parts count (two 1µF flying capacitors and two small bypass capacitors at VIN and OUT) makes these devices ideally suited for small, battery-powered applications.