AAT3663 Datasheet | Advanced Analogic Technologies

1A Linear Li-Ion Battery Charger for Single and Dual Cell Applications General Description .. Features - - - - - - - - - - - - - - - - Battery Manager™ The AAT3663 Battery Manager™ is a member of Analogic Tech’s Total Power Management IC™ family. This device is an integrated single/dual cell Lithium-Ion (Li-Ion) / polymer battery charger IC designed to operate from USB ports or an AC adapter inputs up to an input voltage of 13.2V. AAT3663 precisely regulates battery charge voltage and current for 4.2V and 8.4V Li-Ion battery cells. The battery charging current is user programmed up to 1A by an external resistor. Battery charge state is continuously monitored for fault conditions. A Digital Thermal Loop Control maintains the maximum possible battery charging current for the optimum set of input to output power dissipation and ambient temperature conditions. In the event of an over-current, over-voltage, shortcircuit, or over-temperature fault condition, the device will automatically shut down, thus protecting the charger and the battery under charge. Two status monitor output pins are provided to indicate the battery charge status by directly driving external LEDs. Additionally, an open-drain powersource detection output (ADPP#) is provided to report presence of an input power supply The AAT3663 is available in a thermally enhanced, space-saving, 14-pin 3x3 mm TDFN package and is specified for operation over the -40°C to +85°C temperature range. 4.0V ~ 13.2V Input Voltage Range patible with USB or AC Adapter Sources Programmable Fast Charge Current from 100m A to 1A Programmable Charge Termination Current Digital Thermal Loop Charge Reduction Less Than 0.4µA Battery Leakage Current Programming Charge Timer Battery Temperature Sensing Battery Temp Sense Open Circuit Detection Automatic Recharge Sequencing Automatic Trickle Charge for Battery Pre-Conditioning Automatic Charge Termination Shutdown/Sleep Mode Less than 1µA Shutdown Current...