ACT9300SSC Datasheet | Advanced Crystal Technology

Tel : Fax : email : +44 118 979 1238 +44 118 979 1283 info@actcrystals. The ACT9300SSC is housed in a miniature, low profile SMD package, with a ceramic base utilising a seam welded metal lid for high reliability and better long-term stability. Spread Spectrum Technology is employed to assist with EMI emission reductions. This 5x3.2mm device is available with CMOS output with a supply voltage of 3.3V. Taped and reeled packaging (1K reels, 16mm tape) and loose quantities are available for purchase, to suit high and low volume production. Other Spread Spectrum devices available in DIL14 and 9.6x11.4x2.5 on request. Tri-state on pin 1 is available for the 1.0 and 3.0% options. .. SPECIFICATION Parameter Symbol VDD fo Δf/fo Topr Tstg Iop Total % 0.5# 1.0 3.0 Specification 3.3VDC ± 5% 6.000 ~160.0 MHz ±25ppm, ±50ppm or ±100ppm 0 ~ +70°C or -40 ~ +85°C -65 to +150°C 7m A (10MHz) 8m A (32.768MHz) 17m A (75MHz) 18m A (125MHz) Down Spread % -0.5# -1 -3% -7d Bc 100MHz at C=0.25# -9d Bc min 100MHz at C=0.5 -15d Bc min 100MHz at C=1.5 6.9KHz min, 55.5KHz max Centre Spread % © ±0.25# ±0.5 ±1.5 Condition Supply Voltage Frequency Range Frequency Stability Temp Operating Range Temp Storage Range Operating Current Spread Percentage Down spread or Centre spread need to be Specified when ordering.- - Tolerance ±2% of Total% Please specify Please specify Please specify Freq Dependant Please specify # Tri State not available. EMI Reduction d Bc: with respect to EMI level with no modulation. See examples Dependant on frequency CL=15p F: @50%VDD Modulation Carrier Frequency Duty Cycle Output Level ‘0’ Output Level ‘1’ Output Impedance Rise & Fall Time (max) Output Load Start-up Time Tri-state# Static discharge Voltage Ageing Cycle to Cycle Jitter Fa Tj Tr Tf N/CL Tosc Tw/t VOL VOH 45/55% 0.8V max 0.2 V typical (at 10% VDD) 2.0V min 3.2V typical (at 90% VDD) 40 ohms typical 4.0n S max (10%VDD to 90%VDD) 15p F CMOS 5m S max, 2m S Typical Tri state: output when low. Disable time...