Datasheet4U Logo Datasheet4U.com

AMS1505 - 5A LOW DROPOUT VOLTAGE REGULATORS

Key Features

  • The AMS1505 series of adjustable and fixed low dropout voltage regulators are designed to provide 5A output current to power the new generation of microprocessors. The dropout voltage of the device is 100mV at light loads and rising to 500mV at maximum output current. A second low current input voltage 1V or greater then the output voltage is required to achieve this dropout. The AMS1505 can also be used as a single supply device. New features have been added to the AMS1505: a remote Sense pin.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
AMS104 (AMSxxxx) Light Sensor Panasonic
AMS104T (AMSxxxT) Light Sensor Panasonic
AMS104Y (AMSxxxx) Light Sensor Panasonic
AMS1117 1A Adjustable/Fixed Low Dropout Linear Regulator JinYu
AMS1117 1A Adjustable / Fixed Low Dropout Linear Regulator Tuofeng Semiconductor

Other Datasheets by Advanced Monolithic Systems

Part Number Description
AMS1505V 5A ULTRA LOW DROPOUT VOLTAGE REGULATORS
AMS1501 1.5A LOW DROPOUT VOLTAGE REGULATORS
AMS1503 3A LOW DROPOUT VOLTAGE REGULATORS
AMS1508 8A LOW DROPOUT VOLTAGE REGULATOR
AMS1510 10A LOW DROPOUT VOLTAGE REGULATORS

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
AMS1505 5 Amp LOW DROPOUT VOLTAGE REGULATOR General Description Features The AMS1505 series of adjustable and fixed low dropout voltage regulators are designed to provide 5A output current to power the new generation of microprocessors. The dropout voltage of the device is 100mV at light loads and rising to 500mV at maximum output current. A second low current input voltage 1V or greater then the output voltage is required to achieve this dropout. The AMS1505 can also be used as a single supply device. New features have been added to the AMS1505: a remote Sense pin is brought out virtually eliminating output voltage variations due to load changes. The typical load regulation, measured at the Sense pin, for a load current step of 100mA to 5A is less than 1mV.