A370-10F Datasheet | Agere Systems

Features s Eight-pin package suitable for CATV applications Frequency range up to 1.0 GHz MQW F-P 1.3 µm laser with single-mode fiber pigtail Wide operating temperature range: - 40 °C to +85 °C No TEC required High output power: typically 1.0 m W power coupled into single-mode fiber Hermetically sealed active ponents Internal back-facet monitor Qualification program: Telcordia Technologies - TA-983 - Telcordia Technologies is a trademark of Telcordia Technologies, Inc. s s s s s s s s A370-Type Analog Uncooled Laser Module Data Sheet March 2001 Description The A370-Type Uncooled Laser Module consists of a laser diode coupled to a single-mode fiber pigtail. The device is available in a standard, 8-pin configuration (see Figure 1 and/or Table 1) and is ideal for CATV applications. The module includes a multiquantum-well Fabry-Perot (MQW F-P) laser and an In Ga As PIN photodiode backfacet monitor in an epoxy-free, hermetically sealed package. The device characteristics listed in this document are met at 1.0 m W output power. Higher- or lower-power operation is possible. Under conditions of a fixed photodiode current, the change in optical output is typically ±0.5 d B over an operating temperature range of - 40 °C to +85 °C. This device incorporates the new Laser 2000 manufacturing process from the Optoelectronics unit of Lucent Technologies Microelectronics Group. Laser 2000 is a low-cost platform that targets high-volume manufacturing and tight product distributions on all optical subassemblies. This platform incorporates an advanced optical design that is produced on the Optoelectronic unit’s highly automated production lines. The Laser 2000 platform is qualified for the central office and uncontrolled environments, and can be used for applications requiring high performance and low cost. 1-900 (C) Figure 1. A370-Type Analog Uncooled Laser Module Schematic, Top View Table 1. Pin Descriptions Pin Number 1 2 3 4 5 6 7 8 Connection NC Case ground NC...