HFBR-5105 Datasheet | Agilent(Hewlett-Packard)

Features - Full pliance with the Optical Performance Requirements of the FDDI PMD Standard - Full pliance with the FDDI LCF-PMD Standard - Full pliance with the Optical Performance Requirements of the ATM 100 Mbps Physical Layer - Full pliance with the Optical Performance Requirements of 100 Base-FX Version of IEEE 802.3u - Very Low Cost 800 nm Alternative with FDDI and ATM pliant Signaling - Multisourced 1x9 Package Style with Choice of Duplex SC or Duplex ST- Receptacle - Wave Solder and Aqueous Wash Process patible - Manufactured in an ISO 9002 Certified Facility Description The HFBR-5100 family of transceivers from Hewlett-Packard provide the system designer with products to implement a range of FDDI and ATM (Asynchronous Transfer Mode) designs at the 100 Mbps/125 MBd rate. The transceivers are all supplied in the new industry standard 1x9 SIP package style with either a duplex SC or a duplex ST- connector interface. FDDI PMD, ATM and Fast Ethernet 2000 m Backbone Links The HFBR-5103/-5103T are 1300 nm products with optical performance pliant with the FDDI PMD standard. The FDDI PMD standard is ISO/IEC 9314-3: 1990 and ANSI X3.166 - 1990. These transceivers for 2000 meter multimode fiber backbones are supplied in the small 1x9 duplex SC or ST package style for those designers who want to avoid the larger MIC/R (Media Interface Connector/Receptacle) defined in the FDDI PMD standard. Hewlett-Packard also provides several other FDDI products pliant with the PMD and SMPMD standards. These products are available with MIC/R, ST© and FC connector styles. They are available in the 1x13 and 2x11 transceiver and 16 pin transmitter/receiver package styles for those designs that require these alternate configurations. The HFBR-5103/-5103T is also useful for both ATM 100 Mbps interfaces and Fast Ethernet 100 Base-FX interfaces. The ATM Forum User-Network Interface (UNI) Standard, Version 3.0, defines the Physical Layer for 100 Mbps Multimode Fiber Interface for ATM in...