HLMP-1521
HLMP-1521 is T-1 (3 mm) High Intensity LED Lamps manufactured by Agilent(Hewlett-Packard).
- Part of the HLMP-1521_Agilent(Hewlett comparator family.
- Part of the HLMP-1521_Agilent(Hewlett comparator family.
Features
- High Intensity
- Choice of 3 Bright Colors High Efficiency Red Yellow High Performance Green
- Popular T-1 Diameter Package
- Selected Minimum Intensities
- Narrow Viewing Angle
- General Purpose Leads
- Reliable and Rugged
- Available on Tape and Reel
Description
This family of T-1 lamps is specially designed for applications requiring higher on-axis intensity than is achievable with a standard lamp. The light generated is focused to a narrow beam to achieve this effect.
Package Dimensions
Selection Guide
Part Number HLMP1320 1321 1420 1421 1520 1521 Minimum Intensity (mcd) at 10 m A 8.6 8.6 9.2 9.2 6.7 6.7 Green (Ga P) Yellow (Ga As P on Ga P)
Description
Untinted Nondiffused Tinted Nondiffused Untinted Nondiffused Tinted Nondiffused Untinted Nondiffused Tinted Nondiffused
Color (Material) High Efficiency Red (Ga As P on Ga P)
1-128
5964-9373E
Absolute Maximum Ratings at TA = 25°C
Parameter Peak Forward Current Average Forward DC Current[2] Power Dissipation[3] Reverse Voltage (IR = 100 µA) Transient Forward Current[4] (10 µsec Pulse) LED Junction Temperature Operating Temperature Range Storage Temperature Range Lead Soldering Temperature [1.6 mm (0.063 in.) from body] Current[1] Red 90 25 30 135 5 500 110 -55 to +100 Yellow 60 20 20 85 5 500 110 -55 to +100 Green 90 25 30 135 5 500 110 -20 to +100 -55 to +100 260°C for 5 seconds Units m A m A m A m W V m A °C °C
Notes: 1. See Figure 5 (Red), 10 (Yellow), or 15 (Green) to establish pulsed operating conditions. 2. For Red and Green series derate linearly from 50°C at 0.5 m A/°C. For Yellow series derate linearly from 50°C at 0.2 m A/°C. 3. For Red and Green series derate power linearly from 25°C at 1.8 m W/°C. For Yellow series derate power linearly from 50°C at 1.6 m W/°C. 4. The transient peak current is the maximum non-recurring peak current that can be applied to the device without damaging the LED die and wirebond. It is not remended that the device be operated at peak currents beyond the peak forward...