MGA-82563 Datasheet | Agilent(Hewlett-Packard)

Features - +17.3 d Bm P1 d B at 2.0 GHz +20 d Bm Psat at 2.0 GHz - Single +3V Supply - 2.2 d B Noise Figure at 2.0␣ GHz - 13.2 d B Gain at 2.0 GHz - Ultra-miniature Package - Unconditionally Stable Surface Mount Package SOT-363 (SC-70) Description Hewlett-Packard’s MGA-82563 is an economical, easy-to-use Ga As MMIC amplifier that offers excellent power and low noise figure for applications from 0.1 to 6 GHz. Packaged in an ultraminiature SOT-363 package, it requires half the board space of a SOT-143 package. The input and output of the amplifier are matched to 50␣ Ω (below 2:1 VSWR) across the entire bandwidth, eliminating the expense of external matching. The amplifier allows a wide dynamic range by offering a 2.2 d B NF coupled with a +31 d Bm Output IP3. The circuit uses state-of-the-art PHEMT technology with proven reliability. On-chip bias circuitry allows operation from a single +3␣ V power supply, while resistive feedback ensures stability (K>1) over all frequencies and temperatures. Pin Connections and Package Marking GND 1 6 OUTPUT and Vd 5 GND 4 GND Applications - Buffer or Driver Amp for PCS, PHS, ISM, SAT and WLL Applications - High Dynamic Range LNA GND 2 INPUT 3 Simplified Schematic OUTPUT and Vd 6 INPUT 3 Note: Package marking provides orientation and identification. BIAS BIAS GND 1, 2, 4, 5 5965-9685E 6-208 MGA-82563 Absolute Maximum Ratings Symbol Vd Vgd Vin Pin T ch TSTG Parameter Device Voltage, RF Output to Ground Device Voltage, Gate to Drain Range of RF Input Voltage to Ground CW RF Input Power Channel Temperature Storage Temperature Units V V V d Bm °C °C Absolute Maximum[1] 5.0 -6.0 +0.5 to -1.0 +13 165 -65 to 150 Thermal Resistance [2]: θch-c = 180°C/W Notes: 1. Permanent damage may occur if any of these limits are exceeded. 2. TC = 25°C (TC is defined to be the temperature at the package pins where contact is made to the circuit board.) MGA-82563 Electrical Specifications, TC = 25°C, ZO = 50 Ω, Vd = 3 V Symbol G test NFtest NF50...