ADNS-2610 Datasheet | Agilent Technologies

Agilent ADNS-2610 Optical Mouse Sensor Data Sheet Features - Precise optical navigation technology - Small form factor (10 mm x 12.5 mm footprint) - No mechanical moving parts - plete 2D motion sensor - mon interface for general purpose controller Description The ADNS-2610 is a new entry level, small form factor optical mouse sensor. It is used to implement a non-mechanical tracking engine for puter mice. Unlike its predecessor, this new optical mouse sensor allows for more pact and affordable optical mice designs. It is based on optical navigation technology, which measures changes in position by optically acquiring sequential surface images (frames) and mathematically determining the direction and magnitude of movement. The output format is a two wire serial port. The current X and Y information are available in registers accessed via the serial port. Resolution is 400 counts per inch (cpi) with rates of motion up to 12 inches per second (ips). Theory of Operation The ADNS-2610 is based on Optical Navigation Technology. It contains an Image Acquisition System (IAS), a Digital Signal Processor (DSP) and a two wire serial port. The sensor is housed in an 8-pin staggered dual inline package (DIP). It is designed for use with the HDNS-2100 Lens, HLMP-ED80-xx000, and the HDNS-2200 LED Clip, providing an optical mouse solution that is pact and affordable. There are no moving parts, so precision optical alignment is not required, thereby facilitating high volume assembly. w w .D w t a S a e h t e U 4 - Smooth surface navigation - Accurate motion up to 12 ips - 400 cpi resolution - High reliability - High speed motion detector - Wave solderable - Single 5.0 volt power supply - Conforms to USB suspend mode specifications - Power conservation mode during times of no movement - Serial port registers - Programming - Data transfer .c m o The IAS acquires microscopic surface images via the lens and illumination system provided by the HDNS-2100,...