HSMS-285C Datasheet | Agilent Technologies

Agilent HSMS-285x Series Surface Mount Zero Bias Schottky Detector Diodes Data Sheet Features - Surface Mount SOT-23/ SOT-143 Packages Description Agilent’s HSMS-285x family of zero bias Schottky detector diodes has been designed and optimized for use in small signal (Pin < -20 d Bm) applications at frequencies below 1.5 GHz. They are ideal for RF/ID and RF Tag applications where primary (DC bias) power is not available. Important Note: For detector applications with input power levels greater than - 20 d Bm, use the HSMS-282x series at frequencies below 4.0 GHz, and the HSMS-286x series at frequencies above 4.0 GHz. The HSMS-285x series IS NOT REMENDED for these higher power level applications. Available in various package configurations, these detector diodes provide low cost solutions to a wide variety of design problems. Agilent’s manufacturing techniques assure that when two diodes are mounted into a single package, they are taken from adjacent sites on the wafer, assuring the highest possible degree of match. Pin Connections and Package Marking 1 2 3 6 5 4 - Miniature SOT-323 and SOT-363 Packages - High Detection Sensitivity: up to 50 m V/µW at 915 MHz - Low Flicker Noise: -162 d BV/Hz at 100 Hz - Low FIT (Failure in Time) Rate- - Tape and Reel Options Available - Matched Diodes for Consistent Performance - Better Thermal Conductivity for Higher Power Dissipation - Lead-free Option Available - For more information see the Surface Mount Schottky Reliability Data Sheet. Notes: 1. Package marking provides orientation and identification. 2. See “Electrical Specifications” for appropriate package marking. SOT-23/SOT-143 Package Lead Code Identification (top view) SINGLE 3 SERIES 3 PLx #0 2 1 UNCONNECTED PAIR 3 4 1 #5 2 #2 Attention: Observe precautions for handling electrostatic sensitive devices. ESD Machine Model (Class A) ESD Human Body Model (Class 0) Refer to Agilent Application Note A004R: Electrostatic Discharge Damage and Control. SOT-363...