UTO1025 Datasheet | Agilent Technologies

Features - 1 Watt Output - Wide Bandwidth: 20 to 1000␣MHz - Low Noise Figure: 3 d B (Typ.) - TO-3 and UCS-1P Case Packaging Description The UTO-1025 1 watt amplifier is a low noise figure, high dynamic range amplifier designed to provide broadband high power output for a wide variety of applications. The amplifier uses two Ga As FET stages with active bias to simultaneously achieve high gain, high output power . and low noise figure over the full military temperature range. Applications for this unique amplifier include bench top test sets, receiver frontend, IF gain stages and other broadband applications requiring low noise and high output power. Inputs and outputs are matched to 50 ohms for easy intergration into new and existing systems. Available packaging for this unit is a hermetic TO-3 or the connectored UCS-1P case. Pin Configuration UTO- TO-3 GROUND (CASE) V+ GROUND ee Data Sh RFOUT RFIN Applications - Bench Top - UHF/VHF Transmitters - munications Circuits - Instrumentation - Mobile Radio UTC- UCS-1P RFIN RFOUT V+ Schematic V+ Maximum Ratings Parameter DC Voltage Continuous RF Input Power Operating Case Temperature Range UTO Operating Case Temperature Range UTC Storage Temperature “R” Series Burn-In Temperature Maximum +16 Volts +15 d Bm1 - 55 to +85°C 0 to +50°C - 62 to +150°C +85°C 39/19 °C/W 3 1.15/3.42 W3 45/65 °C 454,100 Hrs.3 RFIN RFOut Thermal Characteristics2 θJC Active Transistor Power Dissipation Junction Temperature Above Case Temperature MTBF (MIL-HDBK-217E, AUF @ 90 °C) . Notes: 1. With no load on output, derate maximum input power (no damage) by 10 d Bm 2. For further information, see Reliability Screening, Pub. 5963-3240E. 3. Values refer to first and second stages, respectively. Weight: (typical) UTO- 14.5 grams; UTC - 281 grams Data Sheet 4 U...