HCPL-M452 Datasheet | Agilent Technologies

Small Outline, 5 Lead, High Speed Optocouplers Technical Data .. HCPL-M452 HCPL-M453 Features - Surface Mountable - Very Small, Low Profile JEDEC Registered Package Outline - patible with Infrared Vapor Phase Reflow and Wave Soldering Processes - Very High mon Mode Transient Immunity: 15000 V/µ s at VCM = 1500 V Guaranteed (HCPL-M453) - High Speed: 1 Mb/s - TTL patible - Guaranteed AC and DC Performance over Temperature: 0°C to 70°C - Open Collector Output - Recognized Under the ponent Program of U.L. (File No. E55361) for Dielectric Withstand Proof Test Voltage of 3750 Vac, 1 Minute - Lead Free Option Description These small outline high CMR, high speed, diode-transistor optocouplers are single channel devices in a five lead miniature footprint. They are electrically equivalent to the following Agilent optocouplers: SO-5 Package HCPL-M452 HCPL-M453 Standard DIP HCPL-4502 HCPL-4503 SO-8 Package HCPL-0452 HCPL-0453 (Note: These devices equivalent to 6N135/6N136 devices but without the base lead.) The SO-5 JEDEC registered (MO-155) package outline does not require “through holes” in a PCB. This package occupies approximately one-fourth the footprint area of the standard dual-in-line package. The lead profile is designed to be patible with standard surface mount processes. These diode-transistor optocouplers use an insulating layer between the light emitting diode and an integrated photon detector to provide electrical insulation between input and output. Separate connections for the photodiode bias and output transistor collector increase the speed up to a hundred times CAUTION: The small device geometries inherent to the design of this bipolar ponent increase the ponent's susceptibility to damage from electrostatic discharge (ESD). It is advised that normal static precautions be taken in handling and assembly of this ponent to prevent damage and/or degradation which may be induced by ESD. 2 over that of a...