Datasheet4U Logo Datasheet4U.com

A6304A - LOW DROPOUT VOLTAGE REGULATOR

Key Features

  • The A6304A series are highly precise, low noise, positive voltage LDO regulators manufactured using CMOS processes. The series achieves high ripple rejection and low dropout and consists of a standard voltage source, an error correction, current limiter and a phase compensation circuit plus a driver transistor. Output voltage is selectable in 100mV increments within a range of 1.5V~5.0V. The series is also compatible with low ESR ceramic capacitors which give added output stability. This stabil.

📥 Download Datasheet

Datasheet Details

Part number A6304A
Manufacturer AiT Semiconductor
File Size 585.47 KB
Description LOW DROPOUT VOLTAGE REGULATOR
Datasheet download datasheet A6304A Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
A63 5 TO 1000 MHz CASCADABLE AMPLIFIER Tyco Electronics
A634 2SA634 Quanzhou Jinmei Electronic
A638 PNP SIlicon Transistor ETC
A639 PNP SIlicon Transistor ETC
A63G7332 128K X 32 Bit Synchronous High Speed SRAM with Burst Counter and Pipelined Data Output AMIC Technology

Other Datasheets by AiT Semiconductor

Part Number Description
A6304 LOW DROPOUT VOLTAGE REGULATOR
A6300 LOW DROPOUT VOLTAGE REGULATOR
A6300A LOW DROPOUT VOLTAGE REGULATOR
A6301 LOW DROPOUT VOLTAGE REGULATOR
A6301A LOW DROPOUT VOLTAGE REGULATOR

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
AiT Semiconductor Inc. www.ait-ic.com A6304A LOW DROPOUT VOLTAGE REGULATOR 300mA LOW DROPOUT CMOS VOLTAGE REGULATORS DESCRIPTION FEATURES The A6304A series are highly precise, low noise, positive voltage LDO regulators manufactured using CMOS processes. The series achieves high ripple rejection and low dropout and consists of a standard voltage source, an error correction, current limiter and a phase compensation circuit plus a driver transistor. Output voltage is selectable in 100mV increments within a range of 1.5V~5.0V. The series is also compatible with low ESR ceramic capacitors which give added output stability. This stability can be maintained even during load fluctuations due to the excellent transient response of the series.