Datasheet4U Logo Datasheet4U.com

A7501 - 300KHz PFM STEP-UP DC-DC CONVERTER

Key Features

  • The A7501 Series is a CMOS VFM-control step-up.
  • Low voltage operation: Start up at 0.9V min switching regulator that mainly consists of a reference (IOUT=1mA) guaranteed voltage source, an oscillator, and a comparator.
  • Low input current: During maximum operation: Enabling products with a low ripple over a wide range, high efficiency, and high output current.
  • 18μA (VOUT=3.3V, typ. ) Duty ratio: 77% Built-in fixed-type PFM Products with a fixed duty ratio of 75 %（Lower Outp.

📥 Download Datasheet

Datasheet Details

Part number A7501
Manufacturer AiT Semiconductor
File Size 538.89 KB
Description 300KHz PFM STEP-UP DC-DC CONVERTER
Datasheet download datasheet A7501 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
A750 Single-Ended Conductive Polymer Aluminum Solid Electrolytic Capacitors KEMET
A7503C Amorphous Solar Cells Panasonic
A75 Cascadable Amplifier MACOM
A75-2 Cascadable Amplifier MACOM
A75-3 Cascadable Amplifier MACOM

Other Datasheets by AiT Semiconductor

Part Number Description
A7506 DC-DC CONVERTER BOOST
A7508 1.3MHz MICROPOWER SYNCHRONOUS DC-DC CONVERTER BOOST
A7512 STEP DOWN DC-DC CONVERTER
A7512A STEP-DOWN DC-DC CONVERTER
A7523 SUPER-SMALL PACKAGE PWM CONTROL STEP-UP SWITCHING REGULATOR

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
AiT Semiconductor Inc. www.ait-ic.com A7501 DC-DC CONVERTER/BOOST(STEP-UP) SUPER-SMALL PACKAGE VFM CONTROL STEP-UPSWITCHING REGULATOR DESCRIPTION FEATURES The A7501 Series is a CMOS VFM-control step-up  Low voltage operation: Start up at 0.9V min switching regulator that mainly consists of a reference (IOUT=1mA) guaranteed voltage source, an oscillator, and a comparator.  Low input current: During maximum operation: Enabling products with a low ripple over a wide range, high efficiency, and high output current.  18μA (VOUT=3.3V, typ.) Duty ratio: 77% Built-in fixed-type PFM Products with a fixed duty ratio of 75 %（Lower Output controller Voltage）or 88%(Higher Output Voltage) are also  External parts: Coil, capacitor, and diode available.