Overview: .. ARF2496K 2.4GHz RF Single Chip Transceiver FCC/ETSI Radiation Test Report
Version 2.0 Application Note General
This document describes the FCC/ETSI radiation test report of the ARF2496K. The test result inside this document should be seen as the reference for your product design; the final radiation/emission result of the ARF2496K is depended on the various parameters of the design of the final product; circuit design, PCB layout and ponent replacement for example. Test Environment
Followed Requirement: FCC part 15.247 and ETSI EN 300 328 Device Under Test: ARF2496K RF module Medium of Radiation: PCB antenna on board Test Condition: In TX mode, output power is 0dBm under direct mode In RX mode, it operates under direct mode Power Condition: DC 3V battery Test Lab: SPORTON International Inc. Frequency range: 30 MHz to 1 GHz , above 1 GHz Figure-1 Photo of ARF2496K Module Figure-2 Photo of Test Board AlfaPlus Semiconductor Inc. The above information is the exclusive intellectual property of AlfaPlus Semiconductor and shall not be disclosed, distributed or reproduced without permission from AlfaPlus Semiconductor. -1- .. ARF2496K 2.4GHz RF Single Chip Transceiver FCC/ETSI Radiation Test Report
Version 2.0 Application Note FCC Test Information
Test Condition Here lists the test conditions of the FCC test at TX/RX mode. Followed Requirement: FCC part 15.247 Test Chamber: Semi Anechoic Chamber ( 966 ) Measurement Mode: RF antenna radiation test Operation Mode of ARF2496K: direct mode Operation Frequency: 2.402GHz, 2.444GHz, 2.483GHz Output Power: 0 dBm Test Item Transmitter field strength at 3m : Measurement the transmitter radiated emission power Transmitter radiated emissions test : Below 1 GHz , above 1 GHz Receiver radiated emissions test : Below 1 GHz , above 1 GHz Summary of the test results Applied Standard : FCC part 15.247 Rule Section 15.247(d) 15.247(d) 15.247(d) 15.
