Datasheet4U Logo Datasheet4U.com

A3974 - Dual Dmos Full-bridge Microstepping PWM Motor Driver

General Description

Serial Interface.

The A3974SED is controlled via a 3-wire (clock, data,strobe) serial port.

The programmable functions allow maximum flexibility in configuring the PWM to the motor drive requirements.

Key Features

  • s ±1.5 A, 50 V Continuous Output Rating s Low rDS(on) DMOS Output Drivers s Programmable Slow, Fast, and Mixed Current-Decay Modes s Serial-Interface Controls Chip Functions s Synchronous Rectification for Low Power Dissipation s Internal UVLO and Thermal Shutdown Circuitry s Crossover-Current Protection s Sleep and Idle Modes Always order by complete part number: A3974SED . 3974 DMOS DUAL FULL-BRIDGE PWM MOTOR DRIVER.

📥 Download Datasheet

Datasheet Details

Part number A3974
Manufacturer Allegro Micro Systems
File Size 284.33 KB
Description Dual Dmos Full-bridge Microstepping PWM Motor Driver
Datasheet download datasheet A3974 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
A3971 DUAL DMOS FULL-BRIDGE DRIVER Allegro
A3972 Dual DMOS Full-Bridge Microstepping PWM Motor Driver Allegro MicroSystems
A3973 Dual DMOS Full-Bridge Microstepping PWM Motor Driver Allegro MicroSystems
A3976 Dual Full Bridge Protected Motor Driver Allegro
A3977 Microstepping DMOS Driver Allegro

Other Datasheets by Allegro Micro Systems

Part Number Description
A3903 Low Voltage DC Motor Driver

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
www.DataSheet4U.com 3974 LOAD 43 SUPPLY1 SENSE1 OUT1A ENABLE1 GND GND GND NC OUT1B NC NC DMOS DUAL FULL-BRIDGE PWM MOTOR DRIVER Designed for pulse-width modulated (PWM) current control of two dc motors, the A3974SED is capable of output currents to ±1.5 A and operating voltages to 50 V. Internal fixed off-time PWM current-control timing circuitry can be programmed via a serial interface to operate in slow, fast, and mixed current-decay modes. Independant ENABLE input terminals are provided for use in controlling the speed and torque of each dc motor with externally applied PWM control signals. Synchronous rectification circuitry allows the load current to flow through the low rDS(on) of the DMOS output driver during the current decay.