ATS682LSH Datasheet | Allegro MicroSystems

Miniature, Two-Wire, True Zero Speed Differential Peak-Detecting Sensor IC Features AND BENEFITS - True zero-speed operation - Automatic Gain Control (AGC) for air gap independent switch points - Automatic Offset Adjustment (AOA) for signal processing optimization - Running-mode calibration for continuous optimization - Precise duty cycle over operating temperature range - Internal current regulator for two-wire operation - Undervoltage lockout - On-chip voltage regulator with wide operating voltage range and stability in the presence of a variety of plex load impedances - Single chip IC for high reliability PACKAGE: 4-pin SIP (suffix SH) Not to scale DESCRIPTION The ATS682LSH is a Hall-effect integrated circuit and rare earth pellet bination that provides a user-friendly solution for true zero-speed digital gear-tooth sensing in two-wire applications. This small package, with an optimized two-wire leadframe, can be easily assembled and used in conjunction with a wide variety of gear shapes and sizes. The integrated circuit incorporates a dual-element Hall-effect circuit and signal processing that switches in response to differential magnetic signals created by ferrous gear teeth. The circuitry contains a sophisticated digital circuit that reduces magnet and system offsets, calibrates the gain for air gap independent switch points and provides true zero-speed operation. Signal optimization occurs at power-up through the adjustment of offset and gain and is and is maintained throughout operation with the use of a running-mode calibration scheme. Runningmode calibration provides immunity from environmental effects such as micro-oscillations of the sensed target or sudden air gap changes. The regulated current output is configured for two-wire interface circuitry and is ideally suited for obtaining speed information in wheel speed applications. The Hall element spacing is optimized for high resolution, small diameter targets. The package is lead...