Datasheet4U Logo Datasheet4U.com

5348 - SMOKE DETECTOR WITH INTERCONNECT AND TIMER

Description

The A5348CA is a low-current CMOS circuit providing all of the required

Features

  • for an ionization-type smoke detector. A networking capability allows as many as 125 units to be interconnected so that if any unit senses smoke, all units will sound an alarm. In addition, special features are incorporated to facilitate alignment and test of the finished smoke detector. This device is designed to comply with Underwriters Laboratories Specification UL217. The internal oscillator and timing circuitry keeps standby power to a minimum by powering down the device for 1.66 seconds an.

📥 Download Datasheet

Datasheet preview – 5348

Datasheet Details

Part number 5348
Manufacturer Allegro MicroSystems
File Size 90.24 KB
Description SMOKE DETECTOR WITH INTERCONNECT AND TIMER
Datasheet download datasheet 5348 Datasheet
Additional preview pages of the 5348 datasheet.
Other Datasheets by Allegro MicroSystems

Full PDF Text Transcription

Click to expand full text
5348 SMOKE DETECTOR WITH INTERCONNECT AND TIMER The A5348CA is a low-current, CMOS circuit providing all of the required features for an ionization-type smoke detector. A networking capability allows as many as 125 units to be interconnected so that if any unit senses smoke, all units will sound an alarm. In addition, special features are incorporated to facilitate alignment and test of the finished smoke detector. This device is designed to comply with Underwriters Laboratories Specification UL217. The internal oscillator and timing circuitry keeps standby power to a minimum by powering down the device for 1.66 seconds and sensing smoke for only 10 ms. Every 24 on/off cycles, a check is made for low battery condition.
Published: |