Datasheet4U Logo Datasheet4U.com

A3916 - Dual DMOS Full-Bridge Motor Driver

General Description

Designed for pulse-width-modulated (PWM) control of lowvoltage stepper motors and single and dual DC motors, the A3916 is capable of output currents up to 1 A per channel and operating voltages from 2.7 to 15 V.

Key Features

  • Wide, 2.7 to 15 V input voltage operating range.
  • Dual DMOS full-bridges: drive two DC motors or one stepper motor.
  • Low RDS(ON) outputs.
  • Synchronous rectification for reduced power dissipation.
  • Low-current sleep mode.
  • Overcurrent protection.
  • Internal UVLO and thermal shutdown circuitry.
  • Integrated charge pump.
  • Pin-to-pin compatible with A3906.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
A39 10 TO 2000 MHz CASCADABLE AMPLIFIER Tyco Electronics
A390 SILICON RECTIFIER Powerex Power Semiconductors
A3901 Dual Full Bridge Low Voltage Motor Driver Allegro
A3903 Low Voltage DC Motor Driver Allegro Micro Systems
A3907 Low Voltage Voice Coil Motor Driver Allegro

Other Datasheets by Allegro MicroSystems

Part Number Description
A3910 Dual Half Bridge Motor Driver
A3918 Low Voltage DC Motor Driver
A3904 Low Voltage Voice Coil Motor Driver
A3906 Low Voltage Stepper and Single/Dual DC Motor Driver
A3908 Low Voltage DC Motor Driver

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
A3916 Dual DMOS Full-Bridge Motor Driver FEATURES AND BENEFITS • Wide, 2.7 to 15 V input voltage operating range • Dual DMOS full-bridges: drive two DC motors or one stepper motor • Low RDS(ON) outputs • Synchronous rectification for reduced power dissipation • Low-current sleep mode • Overcurrent protection • Internal UVLO and thermal shutdown circuitry • Integrated charge pump • Pin-to-pin compatible with A3906 PACKAGES: 16-contact QFN 3 mm × 3 mm (suffix ES) DESCRIPTION Designed for pulse-width-modulated (PWM) control of lowvoltage stepper motors and single and dual DC motors, the A3916 is capable of output currents up to 1 A per channel and operating voltages from 2.7 to 15 V.