Datasheet4U Logo Datasheet4U.com

A6260 - High Brightness LED Current Regulator

General Description

The A6260 is a linear programmable current regulator providing up to 350 mA for driving high-brightness LEDs.

The LED current, accurate to 4%, is set by a single low-power sense resistor.

Driving LEDs with constant current ensures safe operation with maximum possible light output.

Key Features

  • AEC-Q100 qualified.
  • LED drive current up to 350 mA.
  • 6 to 40 V supply.
  • Reverse battery protection.
  • Low drop-out voltage.
  • LED short circuit and thermal protection.
  • 10 µA maximum shutdown current.
  • PWM dimming control input.
  • Current slew rate limiting.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
A6263 Protected LED Array Driver Allegro
A6265 Automotive High Current LED Controller Allegro
A6267 Automotive High Current LED Controller Allegro
A6269 Automotive LED Array Driver Allegro
A6201 250mA LOW CONSUMPTION LINEAR REGULATOR AiT Semiconductor

Other Datasheets by Allegro MicroSystems

Part Number Description
A6261 Protected LED Array Driver
A6262 Automotive LED Array Driver
A6264 Automotive Stop/Tail LED Array Driver
A6266 High Current LED Controller
A6268 Automotive High Current LED Controller

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
A6260 High Brightness LED Current Regulator FEATURES AND BENEFITS ▪ AEC-Q100 qualified ▪ LED drive current up to 350 mA ▪ 6 to 40 V supply ▪ Reverse battery protection ▪ Low drop-out voltage ▪ LED short circuit and thermal protection ▪ 10 µA maximum shutdown current ▪ PWM dimming control input ▪ Current slew rate limiting PACKAGE: 8-pin SOICN with exposed thermal pad (suffix LJ) Not to scale Not to scale DESCRIPTION The A6260 is a linear programmable current regulator providing up to 350 mA for driving high-brightness LEDs. The LED current, accurate to 4%, is set by a single low-power sense resistor. Driving LEDs with constant current ensures safe operation with maximum possible light output.