Datasheet4U Logo Datasheet4U.com

A6285 - 16-Channel Constant-Current Latched LED Driver

General Description

The A6285 is designed for LED display applications.

This BiCMOS device includes an On/Off shift register, a Dot Correction (DC) shift register, accompanying data latches, and 16 MOS constant-current sink drivers with active pull-ups that can be enabled or disabled as required by the application.

Key Features

  • 3.0 to 5.5 V logic supply range.
  • Schmitt trigger inputs for improved noise immunity.
  • Power-On Reset (POR).
  • Up to 80 mA constant-current sinking outputs.
  • LED open circuit detection (LOD).
  • Dot correction (DC) for adjusting LED light intensity on each channel with 7-bit resolution.
  • Low-power CMOS logic and latches.
  • High data input rate up to 30 MHz.
  • Active output pull-ups with enable/disable.
  • 20 ns typical staggering delay between outputs.
  • Int.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
A6283 4.6W DUAL AUDIO POWER AMPLIFIER UTC
A6201 250mA LOW CONSUMPTION LINEAR REGULATOR AiT Semiconductor
A6201A CMOS LOW DROPOUT REGULATOR AiT Semiconductor
A6211 Buck Regulator LED Driver Allegro
A6213 PWM Dimmable Buck Regulator LED Driver Allegro

Other Datasheets by Allegro MicroSystems

Part Number Description
A6280 3-Channel Constant-Current LED Driver
A6281 3-Channel Constant Current LED Driver
A6282 16-Channel Constant-Current LED Driver
A6284 Linear Current Regulator/Controller
A6284-1 Linear Current Regulator/Controller

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
A6285 16-Channel Constant-Current Latched LED Driver with Open LED Detection and Dot Correction Features and Benefits ▪ 3.0 to 5.5 V logic supply range ▪ Schmitt trigger inputs for improved noise immunity ▪ Power-On Reset (POR) ▪ Up to 80 mA constant-current sinking outputs ▪ LED open circuit detection (LOD) ▪ Dot correction (DC) for adjusting LED light intensity on each channel with 7-bit resolution ▪ Low-power CMOS logic and latches ▪ High data input rate up to 30 MHz ▪ Active output pull-ups with enable/disable ▪ 20 ns typical staggering delay between outputs ▪ Internal UVLO and thermal shutdown (TSD) circuitry ▪ Fault output flags for an LED open circuit (LOD) or a thermal shutdown (TSD) condition Package: 32 Contact QFN (suffix ET) 5 mm × 5 mm 0.