Datasheet4U Logo Datasheet4U.com

UDQ2547 - PROTECTED QUAD POWER DRIVERS

Datasheet Summary

Description

and Application for further information.

Features

  • s s s s s Output SOA Protection s Low Output-Saturation Voltage Diagnostic FAULT Output s TTL and 5 V CMOS Compatible Inputs Independent Over-Current Protection for Each Driver Independent Thermal Protection for Each Driver 600 mA Output Current per Channel Always order by complete part number: a prefix to indicate operating temperature range + the basic four-digit part number + a suffix to indicate package style, e. g. , UDK2547EB . 2547.

📥 Download Datasheet

Datasheet preview – UDQ2547

Datasheet Details

Part number UDQ2547
Manufacturer Allegro MicroSystems
File Size 76.38 KB
Description PROTECTED QUAD POWER DRIVERS
Datasheet download datasheet UDQ2547 Datasheet
Additional preview pages of the UDQ2547 datasheet.

📁 Similar Datasheet

Other Datasheets by Allegro MicroSystems
  • UDQ2547B - PROTECTED QUAD POWER DRIVERS
  • UDQ2543 - PROTECTED QUAD POWER DRIVER
  • UDQ2543B - PROTECTED QUAD POWER DRIVER
  • UDQ2549 - PROTECTED QUAD POWER DRIVER
  • UDQ2559 - PROTECTED QUAD POWER DRIVER
  • UDQ2559B - PROTECTED QUAD POWER DRIVER
  • UDQ2596 - (UDQ2596 / UDQ2597) 8-CHANNEL SATURATED SINK DRIVERS
  • UDQ2597 - (UDQ2596 / UDQ2597) 8-CHANNEL SATURATED SINK DRIVERS

Full PDF Text Transcription

Click to expand full text
2547 PROTECTED QUAD POWER DRIVERS 2547 PROTECTED QUAD POWER DRIVERS Providing interface between low-level logic and power loads, the UDK/UDN/UDQ2547B and UDK/UDN/UDQ2547EB quad power drivers combine logic gates and high-current bipolar outputs with complete output protection. Each of the four outputs will sink 600 mA in the ON state. The outputs have a minimum breakdown voltage (load dump) of 60 V and a sustaining voltage of 40 V. The inputs are compatible with TTL and 5 V CMOS logic systems and include internal pull-down resistors to ensure that the outputs remain OFF if the inputs are open-circuited. Over-current protection for each channel has been designed into these devices and is activated at approximately 1.3 A.
Published: |