Datasheet4U Logo Datasheet4U.com

UGN3235 - DUAL-OUTPUT HALL-EFFECT SWITCH

Key Features

  • two outputs which are independently activated by magnetic fields of opposite polarity. Each sensor IC includes a Hall voltage generator, two Schmitt triggers, a voltage regulator, output transistors, and on-board reverse polarity protection. The regulator enables these devices to operate from voltages ranging between 4.5 V and 24 V. On-chip compensation circuitry stabilizes the switch points over temperature. Data Sheet 27633A.
  • V CC X 1 2 3 4 Each open-collector output is independent.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
UGN3201M (UGN-3xxx) Magnetically Activated Switches Sprague
UGN3203M (UGN-3xxx) Magnetically Activated Switches Sprague
UGN3220K Low Cost Dual Output Hall Effect Switch Sprague Electric
UGN3013T Low Cost Hall Effect Digital Switches ETC
UGN3013U Low Cost Hall Effect Digital Switches ETC

Other Datasheets by Allegro MicroSystems

Part Number Description
UGN3275 COMPLEMENTARY-OUTPUT HALL-EFFECT LATCH
UGN3055U MULTIPLEXED TWO-WIRE HALL-EFFECT SENSOR
UGN3059KA HALL-EFFECT GEAR-TOOTH SENSORS
UGN3060KA HALL-EFFECT GEAR-TOOTH SENSORS
UGN3113 (UGN3113 - UGN3130) Hall-Effect Switch

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
www.DataSheet4U.com 3235 DUAL-OUTPUT HALL-EFFECT SWITCH 3235 DUAL-OUTPUT HALL-EFFECT SWITCH Type UGN3235K Hall-effect sensors are bipolar integrated circuits designed for commutation of brushless dc motors, and other rotary encoding applications using multi-pole ring magnets. The device features two outputs which are independently activated by magnetic fields of opposite polarity. Each sensor IC includes a Hall voltage generator, two Schmitt triggers, a voltage regulator, output transistors, and on-board reverse polarity protection. The regulator enables these devices to operate from voltages ranging between 4.5 V and 24 V. On-chip compensation circuitry stabilizes the switch points over temperature.