Datasheet4U Logo Datasheet4U.com

W6765 - STRW6765

General Description

The STR-W6765 is a quasi-resonant topology IC designed for SMPS applications.

It shows lower EMI noise characteristics than conventional PWM solutions, especially at greater than 2 MHz.

Key Features

  • Quasi-resonant topology IC ⇒ Low EMI noise and soft switching.
  • Bottom-skip operation ⇒ Improved system efficiency over the entire output load by avoiding increase of switching frequency.
  • Standby burst mode operation ⇒ Lowers input power at very light output load condition.
  • Avalanche-guaranteed MOSFET ⇒ Improves systemlevel reliability and does not require VDSS derating.
  • 800 V / 1.8 Ω, 52 to 110 W (Universal/230 Vac input) Continued on the next page… Package: 6-pin TO-.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
W67-A2Q12-10 Magnetic Hydraulic Circuit Breakers Tyco
W67-A2Q12-5 Magnetic Hydraulic Circuit Breakers Tyco
W67-X2Q10-3 Magnetic Hydraulic Circuit Breakers Tyco
W67-X2Q10-5 Magnetic Hydraulic Circuit Breakers Tyco
W67-X2Q110-15 Magnetic Hydraulic Circuit Breakers Tyco

Other Datasheets by Allegro MicroSystems

Part Number Description

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
STR-W6765 www.DataSheet4U.com Quasi-Resonant Topology Primary Switching Regulators Description The STR-W6765 is a quasi-resonant topology IC designed for SMPS applications. It shows lower EMI noise characteristics than conventional PWM solutions, especially at greater than 2 MHz. It also provides a soft-switching operation to turn on the internal MOSFET at close to zero voltage (VDS bottom point) by use of the resonant characteristic of primary inductance and a resonant capacitor. The package is a fully molded TO-220, which contains the controller chip (MIC) and MOSFET, enabling output power up to 52 W with universal input or 110 W with a 230 Vac input.