Datasheet4U Logo Datasheet4U.com

A1330 - Programmable Angle Sensor

General Description

The A1330 is a 360° angle sensor IC that provides contactless high-resolution angular position information based on magnetic Circular Vertical Hall (CVH) technology.

It has a system-onchip (SoC) architecture that includes: a CVH front end, digital signal processing, and an analog output driver.

Key Features

  • Contactless 0° to 360° angle sensor IC, for angular position, rotational speed, and direction measurement.
  • Single and dual die options available in same package.
  • Non-volatile memory (EEPROM) for use in.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
A13303x THICK FILM Fenghua Advanced Technology
A1331 2SA1331 Sanyo
A1334 Micro Power Hall-Effect Angle Sensor Allegro MicroSystems
A1337 2SA1337 Hitachi Semiconductor
A1338 2SA1338 Sanyo

Other Datasheets by Allegro MicroSystems

Part Number Description
A1332 Precision Hall Effect Angle Sensor
A1333 Hall-Effect Angle Sensor
A1335 Precision Hall-Effect Angle Sensor
A1337 Hall-Effect Angle Sensor
A1304 Linear Hall-Effect Sensor

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
A1330 Programmable Angle Sensor IC with Analog and PWM Output FEATURES AND BENEFITS • Contactless 0° to 360° angle sensor IC, for angular position, rotational speed, and direction measurement • Single and dual die options available in same package • Non-volatile memory (EEPROM) for use in application trimming/calibration • Circular Vertical Hall (CVH) technology provides a single-channel sensor system with air gap independence • Angle Refresh Rate (output rate) configurable between 25 and 3200 µs through EEPROM programming • Customer-programmable output clamp levels provide short-circuit diagnostic capabilities • Open-circuit detection on ground pin (broken wire) • Undervoltage lockout for VCC below specification • Fine angle scaling for short-stroke applications • Missing Magnet Error fl