Allegro MicroSystems ACS713
The ACS713 outputs an analog signal, VOUT . The terminals of the conductive path are electrically isolated from the signal leads (pins 5 through 8). This allows the ACS713 to be used in applications requiring electrical isolation without the use of opto-isolators or other costly isolation techniques.| Part No. | ACS713 |
|---|---|
| Datasheet | ACS713 Download |
| Manufacturer |  Allegro MicroSystems |
| Description | Fully Integrated Hall Effect-Based Linear Current Sensor |
| Buy | Stock & Price |
FEATURES AND BENEFITS
● Low-noise analog signal path● Device bandwidth is set via the new FILTER pin
● 5 µs output rise time in response to step input current
● 80 kHz bandwidth
● Total output error 1.5% at TA = 25°C
● Small footprint, low-profile SOIC8 package
● 1.2 mΩ internal conductor resistance
● 2.1 kVRMS minimum isolation voltage from pins 1-4 to pins 5-8
● 5.0 V, single supply operation
● 133 to 185 mV/A output sensitivity
● Output voltage proportional to DC currents
● Factory-trimmed for accuracy
● Extremely stable output offset voltage
● Nearly zero magnetic hysteresis
● Ratiometric output from supply voltage TÜV America Certificate Number: U8V 15 05 54214 038 CB 13 06 54214 026 PACKAGE: 8-Lead SOIC (suffix LC)
DESCRIPTION
The Allegro™ ACS713 provides economical and precise solutions for DC current sensing in industrial, commercial, and communications systems. The device package allows for easy implementation by the customer. Typical applications include motor control, load detection and management, switch-mode power supplies, and overcurrent fault protection.
