Datasheet4U Logo Datasheet4U.com

ACS718 - High Isolation Linear Current Sensor

General Description

The Allegro™ ACS718 current sensor IC is an economical, high isolation solution for AC or DC current sensing in industrial, commercial, and communications systems.

Key Features

  • IEC/UL 60950-1 Ed. 2 certified to:.
  • Dielectric Strength = 4800 Vrms (tested for 60 seconds).
  • Basic Isolation = 1550 Vpeak.
  • Reinforced Isolation = 800 Vpeak.
  • Small footprint, low-profile SOIC16 wide-body package suitable for space constrained.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
ACS710 120kHz Bandwidth High Voltage Isolation Current Sensor Allegro MicroSystems
ACS711 Hall Effect Linear Current Sensor Allegro MicroSystems
ACS712 Fully Integrated / Hall Effect-Based Linear Current Sensor Allegro MicroSystems
ACS713 Fully Integrated Hall Effect-Based Linear Current Sensor Allegro MicroSystems
ACS714 Hall Effect-Based Linear Current Sensor Allegro MicroSystems

Other Datasheets by Allegro MicroSystems

Part Number Description
ACS71020 AC Power Monitoring
ACS71240 Galvanically Isolated Current Sensor
ACS717 Linear Current Sensor
ACS70310 Programmable Linear Hall-Effect Sensor
ACS70311 Programmable Linear Hall-Effect Sensor

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
ACS718 High Isolation Linear Current Sensor IC with 850 µΩ Current Conductor FEATURES AND BENEFITS • IEC/UL 60950-1 Ed. 2 certified to: □ Dielectric Strength = 4800 Vrms (tested for 60 seconds) □ Basic Isolation = 1550 Vpeak □ Reinforced Isolation = 800 Vpeak • Small footprint, low-profile SOIC16 wide-body package suitable for space constrained applications that require high galvanic isolation • 0.85 mΩ primary conductor for low power loss and high inrush current withstand capability • Low, 350 μARMS/√Hz noise density results in typical input referred noise of 70 mA(rms) at max bandwidth (40 kHz) • 5.