ATS535CSB Datasheet PDF | Allegro MicroSystems

Allegro MicroSystems ATS535CSB

The ATS632LSC gear-tooth sensor is an optimized Hall-effect IC/ magnet combination that provides tooth/valley recognition and extremely accurate tooth edge detection when used with large-pitch targets. The sensor subassembly consists of a high-temperature plastic shell that holds together a compound samarium-cobalt magnet, a single-element self-calibrating Hall-effect IC that has been optimized to the magnetic circuit, and a voltage regulator. This small package, with its non-oriented operation, can be easily assembled and used in conjunction with a number of gear configurations.

Part No.	ATS535CSB
Datasheet	ATS535CSB Download
Manufacturer	Allegro MicroSystems
Description	ZERO-SPEED/ SELF-CALIBRATING/ NON-ORIENTED/ HALL-EFFECT GEAR-TOOTH SENSOR
Buy	Stock & Price

ABSOLUTE MAXIMUM RATINGS

Supply Voltage, VCC ......................... 24 V Reverse Supply Voltage, VRCC (1 minute max.) ................ -24 V Output OFF Voltage, VOUT ................ 24 V Output Current, IOUT .. Internally Limited Reverse Output Current, I OUT ........ 50 mA Package Power Dissipation, PD .................................... See Graph Operating Temperature Range, TA ........................... -40°C to +150°C Storage Temperature, TS ............ +170 °C continued next page… Always order by complete part number, e.g., ATS632LSC . ATS632LSC HALL-EFFECT GEAR-TOOTH SENSOR SUBASSEMBLY ALLOWABLE PACKAGE POWER DISSIPATION IN mW

FEATURES AND BENEFITS

s s s s s s s s Non-Oriented Installation Fully Optimized Gear-Tooth Sensors Single-Chip Sensing IC for High Reliability Zero-Speed Digital Output Representing Target Profile Extremely Low Timing Accuracy Drift with Temperature Large Operating Air Gaps Optimized Magnetic Circuit Self-Calibrating Circuitry with Integrated Offset...