Datasheet4U Logo Datasheet4U.com

APC30 Datasheet Axial Power Chokes

Manufacturer: Allied Components International

Overview: RoHS Axial Power Chokes APC30 Dimensions: Inches (mm) 20 AWG 1.15 NOMINAL (29) 0.92 (23.37) 1.15 NOMINAL (29) 0.47 (11.94) Allied Part Number Inductance (µh) Tolerance (%) DCR Max.

Key Features

  • Axial pre-tinned leads.
  • Protected with UL shrink tubing.
  • Non standard values and tolerances available.
  • High saturation core material used for high inductance and low DCR. Electrical Inductance: Measured at 1KHz with no DC current. Tolerance: 10% over entire inductance range. Available in tighter tolerances. Current Rating: Based on Inductance drop of < 10% of Initial value. Operating Temp: -55ºC to + 125ºC Test Procedures: L measured on CH-100 @ 1KHz DCR m.

Similar Datasheet

Brand Logo Part Number Description Manufacturer
Anpec Logo APC308 Rail to Rail Output CMOS Operating Amplifier Anpec

More Datasheets from Allied Components International

Part Number Description
APC30-xxxx Axial Power Chokes

APC30 Distributor