F1C800
F1C800 is HD Video Boombox Processor manufactured by Allwinner.
Overview
1. Overview
The F1C800 processor represents Allwinner’s latest achievement in HD Video Boombox products. The processor adopts the latest H.265 video decoder, advanced audio system, low-power technology and high integration architecture design. These features help F1C800 keep the leading user experience in HD video playback, image quality and total performance. Integrated 4-lane MIPI DSI display output interface is up to 1080p@60fps. In order to reduce the BOM cost, the F1C800 integrates an internal DDR2 memory. A number of interfaces, such as RGB LCD, LVDS, TVIN, TVOUT, USB, I2S/PCM, UART, SPI, provide the flexible connecting solutions.
F1C800 Datasheet(Revision 1.0)
Copyright © 2017 Allwinner Technology Co.,Ltd. All Rights Reserved.
Page 8
Features
2. Features
2.1. CPU
- ARM926-EJS
- Supports 32 KB Instruction cache and 32 KB Data cache
2.2. Memory Subsystem
Boot ROM
- On-chip memory
- Supports system boot from the following device:
- SD Card
- SPI Nor Flash
- SPI Nand Flash
- USB OTG
SDRAM
- SIP DDR2 memory
- Supports clock frequency up to 400 MHz
SMHC
- Up to 2 SD/MMC Host Controller(SMHC) interfaces
- pliant with SD physical layer specification V2.0, SDIO card specification V2.0
- 1-bit or 4-bit data bus transfer mode up to 50 MHz in SDR mode
- Supports block size of 1 to 65535 bytes
- Embedded special DMA to do data transfer
2.3. System Peripheral
- 10 PLLs
- Supports an external 24 MHz crystal oscillator , an external 32.768 k Hz crystal oscillator and an on-chip 16 MHz RC oscillator
- Supports clock configuration and clock generated for corresponding modules
- Supports software-controlled clock gating and software-controlled reset for corresponding modules
Timer
- 2 on-chip Timers with interrupt-based operation
- 1 Watchdog to generate reset signal or interrupt
F1C800 Datasheet(Revision 1.0)
Copyright © 2017 Allwinner Technology Co.,Ltd. All Rights Reserved.
Page...
