Datasheet4U Logo Datasheet4U.com

AT002N5-00 - GaAs 50 dB IC Voltage Variable Dual Control Attenuator DC-3 GHz

General Description

The AT002N5-00 attenuator provides up to 50 dB variable attenuation from DC

3 GHz under non-reflective conditions.

Attenuation can be controlled by varying each of the two control bias voltages from 0 to -5 V.

Key Features

  • s 50 dB Range s Low Insertion Loss s Fast Switching s Meets MIL-STD-883 Screening Requirements 1.230 GND 1.076 Chip Outline 0.349 0.570 0.793 V1 (ALT. ) V2 (ALT. ) 0.981 GND 1.072.

📥 Download Datasheet

Datasheet Details

Part number AT002N5-00
Manufacturer Alpha Industries
File Size 134.50 KB
Description GaAs 50 dB IC Voltage Variable Dual Control Attenuator DC-3 GHz
Datasheet download datasheet AT002N5-00 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
AT0004 ADSL Transformer BESTJOB
AT0009 ADSL Transformer BESTJOB
AT0018 ADSL Transformer BESTJOB
AT001D3-24 GaAs IC 3 Bit Digital Attenuator Skyworks Solutions
AT0050 ADSL Line Transformer BESTJOB

Other Datasheets by Alpha Industries

Part Number Description
AT002N5-01 GaAs 50 dB IC Voltage Variable Dual Control Attenuator DC-3 GHz
AT002N5-10 GaAs 50 dB IC Voltage Variable Dual Control Attenuator
AT002N5-11 GaAs 50 dB IC Voltage Variable Dual Control Attenuator DC-3 GHz
AT002D8-31 GaAs 4 Bit Digital Attenuator
AT002S3-11 GaAs 35 dB IC Voltage Variable Single Control Attenuator 0.4-2.5 GHz

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
GaAs 50 dB IC Voltage Variable Dual Control Attenuator DC–3 GHz AT002N5-00 Features s 50 dB Range s Low Insertion Loss s Fast Switching s Meets MIL-STD-883 Screening Requirements 1.230 GND 1.076 Chip Outline 0.349 0.570 0.793 V1 (ALT.) V2 (ALT.) 0.981 GND 1.072 Description The AT002N5-00 attenuator provides up to 50 dB variable attenuation from DC–3 GHz under non-reflective conditions. Attenuation can be controlled by varying each of the two control bias voltages from 0 to -5 V. The control current is less than 100 µA and the attenuator will operate at 0 dBm with switching time, typically 10 ns. The chip is configured using two “T” attenuators in the series and two in parallel. This device may be used with a single bias (V1 = 0) but with reduced attenuation and match.