AZ5125-02F Datasheet | Amazing Micro

Transient Voltage Suppressing Device Tiny Package for ESD/Transient Protection Features ESD Protect for 2 Lines with Bi-directional Provide ESD protection for the protected line to IEC 61000-4-2 (ESD) ±15k V (air), ±15k V (contact) IEC 61000-4-4 (EFT) 50A (5/50ns) Cable Discharge Event (CDE) proprietary clamping cells in a single package. During transient conditions, the proprietary clamping cells prevent over-voltage on the power lines or control/data lines, protecting any downstream ponents. AZ5125-02F is bi-directional and may be used on lines where the signal swings above and below ground. AZ5125-02F may be used to meet the ESD immunity requirements of IEC 61000-4-2, Level 4 (±15k V air, ±8k V contact discharge). Ultra-small DFN1006P3X package (1.0mmx0.6mmx0.45mm) saves board space Protect two I/O lines or two power lines Fast turn-on and Low clamping voltage Low operating voltage: 5V maximum Solid-state silicon-avalanche and active circuit triggering technology Green Part Circuit Diagram / Pin Configuration Applications Mobile Phones Hand Held Portable Applications puter Interfaces Protection Microprocessors Protection Serial and Parallel Ports Protection Control Signal Lines Protection Power lines on PCB Protection Latchup Protection DFN1006P3X (Bottom View) (1.0mm x 0.6mm x 0.45mm) Description AZ5125-02F is a design which includes two bi-directional ESD rated clamping cells to protect two power lines, or two control lines, or two low speed data lines in an electronic systems. The AZ5125-02F has been specifically designed to protect sensitive ponents which are connected to power and control lines from over-voltage damage and latch-up caused by Electrostatic Discharging (ESD), Electrical Fast Transients (EFT), and Cable Discharge Event (CDE). AZ5125-02F is a unique design which includes Revision 2012/09/19 ©2012 Amazing Micro. 1 .amazing IC. Transient Voltage Suppressing Device Tiny Package for ESD/Transient...