AZC099-04S Datasheet | Amazing Micro

Features ESD Protect for 4 high-speed I/O channels Provide ESD protection for each channel to IEC 61000-4-2 (ESD) ±15k V (air), ±8k V (contact) IEC 61000-4-4 (EFT) (5/50ns) Level-3, 20A for I/O, 40A for Power IEC 61000-4-5 (Lightning) 4A (8/20µs) AZC099-04S may be used to meet the ESD immunity requirements of IEC 61000-4-2, Level 4 (± 15k V air, ±8k V contact discharge). One AZC099-04S can be used to replace 4 BAV99 devices in a 5V application or a lower than 5V application. For low operating voltage applications: 5V, 4.2V, 3.3V, 2.5V Low capacitance : 1.0p F typical Fast turn-on and Low clamping voltage Array of surge rated diodes with internal equivalent TVS diode Small package saves board space Solid-state silicon-avalanche and active circuit triggering technology Circuit Diagram Applications Video Graphics Cards USB2.0 Power and Data lines protection Notebook and PC puters Monitors and Flat Panel Displays IEEE 1394 Firewire Ports SIM ports Pin Configuration I/O 4 VDD I/O 3 Description AZC099-04S is a high performance and low cost design which includes surge rated diode arrays to protect high speed data interfaces. The AZC099-04S family has been specifically designed to protect sensitive ponents, which are connected to data and transmission lines, from over-voltage caused by Electrostatic Discharging (ESD), Electrical Fast Transients (EFT), and Lightning. AZC099-04S is a unique design which includes surge rated, low capacitance steering diodes and a unique design of clamping cell which is an equivalent TVS diode in a single package. During transient conditions, the steering diodes direct the transient to either the power supply line or to the ground line. The internal unique design of clamping cell prevents over-voltage on the power line, protecting any downstream ponents. Revision 2011/07/30 ©2011-2012 Amazing Micro. 1 I/O 1 I/O 2 JEDEC SOT23-6L (Top View) .amazing IC. http://.. Low Capacitance ESD...