AAT3620 Datasheet | Anadigics

PRODUCT DATASHEET .. AAT3620178 1-Cell Li+ Switch Mode Battery Charger Features - - - - - - - - - - - - - - - - 4.3V~6.0V Input Range Up to 2.0A Charge Current Capability 1.5MHz PWM/Linear Charger Over 90% Full Rate Charge Efficiency Integrated Switching Device Integrated Sense Resistor Built-in Reverse Blocking Feature Battery Preconditioning/Constant Voltage/Constant Current Charge Mode Programmable End of Charge Current 1% Constant Voltage Mode Regulation Built-in Programmable Charging Timer Charge Current Indication Pin Over-Voltage, Over-Current, and Over-Temperature Protection Battery Over-Temperature Protection Power-On Reset and Soft-Start TDFN33-14 Package Battery Manager TM General Description The AAT3620 Battery Manager™ is a member of Analogic Tech’s Total Power Management IC™ family. With the many functions added to mobile devices such as color display, camera with flash, organizer, video, etc, the battery capacity must keep pace with the power requirements. The AAT3620 is the ideal solution for high capacity Li+ batteries and can supply up to 2.0A charge current with minimal thermal impact to the system. The AAT3620 is a PWM switch mode / linear charger with high charge efficiency at the full constant current (fast charge) rate. Based on a 1.5MHz PWM step-down “buck” converter, the AAT3620 PWM switch mode controls the constant current charge mode up to 2.0A, and automatically switches to linear mode charging during the battery conditioning low level current and the light load end of charge current termination region. The full charge rate and the end of charge current can be programmed with separate external resistors. A shared charge current indication pin is available for a Coulomb counter. Battery charge temperature and charge state are fully monitored for fault conditions. In the event of an overcurrent, over-voltage, short-circuit or over-temperature failure, the device will automatically shut down. A status monitor output pin is...