Anaheim MBC100
The MBC100 is a low-cost bipolar chopper driver designed to drive four-phase step motors rated up to 1A. The MBC100 is compact and self-contained, requiring only an 8VDC - 40VDC power source and clock input to operate. The maximum motor current can be adjusted from 200mA to 1A, by adjusting a potentiometer on the unit; no external resistors are required to set the current level.| Part No. | MBC100 |
|---|---|
| Datasheet | MBC100 Download |
| Manufacturer | Anaheim |
| Description | Modular Bipolar Chopper Driver |
| Buy | Stock & Price |
DESCRIPTION
Motor phase 1 Motor phase 3 Motor phase 2 Motor phase 4 No connection WIRING DIAGRAM 910 E. Orangefair Lane, Anaheim, CA 92801● (714) 992-8990
● Fax: (714) 992-0471 website: #L010053 CONNECTOR DB1 (INPUT)
DESCRIPTION
The CLOCK input is the stepping clock for the driver. When the clock input transitions from high to low, the motor takes one step. 2 DIRECTION The DIRECTION input controls the direction in which the motor steps. If the DIRECTION input is high the motor will step in the clockwise (CW) direction. If the DIRECTION input is low the motor will step in the counterclockwise (CCW) direction. The directions are defined looking in to the shaft of the motor. Note that the order of connection of the motor leads to the driver outputs affects the direction in which the motor turns. 3 ON/OFF The ON/OFF input controls the motor. If the ON/OFF input is high, the motor will step with the clock and will have a holding current at standstill. If the ON/OFF input is low the motor will be turned off with no holding current and clock signals will be ignored.