Datasheet4U Logo Datasheet4U.com

ADE7752 - Polyphase Energy Metering

General Description

The ADE7752 is a high accuracy polyphase electrical energy measurement IC.

The ADE7752A is a pin-to-pin compatible low power version of ADE7752.

ADE7752A are the same.

Key Features

  • High accuracy, supports 50 Hz/60 Hz IEC62053-2x Less than 0.1% error over a dynamic range of 500 to 1 Compatible with 3-phase/3-wire delta and 3-phase/4-wire Wye configurations The ADE7752 supplies average real power on frequency outputs F1 and F2 High frequency output CF is intended for calibration and supplies instantaneous real power Logic output REVP indicates a potential miswiring or negative power for each phase Direct drive for electromechanical counters and 2-phase stepper motors (F1 and.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
ADE-1 Frequency Mixer Mini-Circuits
ADE-1+ Frequency Mixer Mini-Circuits
ADE-10MH Frequency Mixer Mini-Circuits
ADE-11X+ Frequency Mixer Mini-Circuits
ADE-18W Frequency Mixer Mini-Circuits

Other Datasheets by Analog Devices

Part Number Description
ADE7752A Polyphase Energy Metering
ADE7752B Polyphase Energy Metering
ADE7751 Energy Metering
ADE7751AAN-REF Energy Metering
ADE7751AN Energy Metering

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
Polyphase Energy Metering IC with Pulse Output ADE7752/ADE7752A FEATURES High accuracy, supports 50 Hz/60 Hz IEC62053-2x Less than 0.1% error over a dynamic range of 500 to 1 Compatible with 3-phase/3-wire delta and 3-phase/4-wire Wye configurations The ADE7752 supplies average real power on frequency outputs F1 and F2 High frequency output CF is intended for calibration and supplies instantaneous real power Logic output REVP indicates a potential miswiring or negative power for each phase Direct drive for electromechanical counters and 2-phase stepper motors (F1 and F2) Proprietary ADCs and DSP provide high accuracy over large variations in environmental conditions and time On-chip power supply monitoring On-chip creep protection (no load threshold) On-chip reference 2.