ADG5404F - 4-Channel Multiplexer

Description

The ADG5404F is an analog multiplexer composed of four single channels with fault protected inputs.

The ADG5404F switches one of the four inputs to a common drain, D, as determined by the 2-bit binary address lines (A0 and A1).

An enable digital input, EN, is used to disable all the switches.

Features

Overvoltage protection up to.
55 V and +55 V Power-off protection up to.
55 V and +55 V Overvoltage detection on source pins Interrupt flags indicate fault status Low on resistance: 10 Ω (typical) On-resistance flatness of 0.5 Ω (maximum) 4 kV human body model (HBM) ESD rating Latch-up immune under any circumstance Known state without digital inputs present VSS to VDD analog signal range ±5 V to ±22 V dual supply operation 8 V to 44 V single-supply operation Fully specified at ±1.

Analog Devices

📥 Download Datasheet

Datasheet Details

Part number	ADG5404F
Manufacturer	Analog Devices
File Size	495.20 KB
Description	4-Channel Multiplexer
Datasheet	ADG5404F Datasheet
Additional preview pages of the ADG5404F datasheet.

📁 Similar Datasheet

Other Datasheets by Analog Devices

ADG5404 - 4-Channel Multiplexer
ADG5401 - Single SPST Switch
ADG5401F - SPST Switch
ADG5408 - 4-Channel Multiplexers
ADG5409 - 8-Channel Multiplexers
ADG5412 - Quad SPST Switches
ADG5412BF - Quad SPST Switches
ADG5412F - Quad SPST Switches

Full PDF Text Transcription

Click to expand full text

Data Sheet Fault Protection and Detection, 10 Ω RON, 4-Channel Multiplexer ADG5404F FEATURES Overvoltage protection up to −55 V and +55 V Power-off protection up to −55 V and +55 V Overvoltage detection on source pins Interrupt flags indicate fault status Low on resistance: 10 Ω (typical) On-resistance flatness of 0.

Published: May 23, 2016 |